Need passcode 4 jabra vbt185z 4 a at&t cell - Jabra VBT185Z Bluetooth Headset

have you tryed all zeros?,i took a jabra to be paired to my phone and the girl put all zeros and it worked.just dont recall how many it was<think between 4 and 6,wont hurt to try each and see if you get it,good luck...

You do need the passcode. It should "auto pair" but the default passkey or pin is 0000 (4 zeros.)

Here is a link to the user manual
http://www.jabra.com/sites/Jabra/GNimages/Products/WirelessHeadset/BT2010/Documents/UM/VBT185z_UM_6198.pdf

Headset Pairing Readiness Instructions:

1. Fully charge headset for two hours.

2. The headset will automatically go into pairing mode if no device has

been previously paired.

3. Set your mobile phone to 'discover Jabra VBT185Z'.
4. Enter passkey or PIN = 0000 (4 zeros), then press Yes or OK.

dw

The standard passcode for Jabra stuff is 0000 (4x zero) Greets

passcode is 0000 i.e. four times zero

Here is a helpful link http://www.ehow.com/how_5169210_bluetooth-passcode.html

Phone passcode:
if you haven't actually manually changed it, the password is always the last four digits of your phone number (ex. 1-555-868-2212 your password is 2212). If you manually changed it, you need to call your cell phone provider and have that worked out.

-CompDoctor

Go to this site, and it will walk you through each step to connect your particular Jabra headset with your cellphone. Choose the headset, and then at the next page, choose your phone. Moving your mouse over each step will change the picture to what you should be seeing on your phone at each step.
http://jabra.pairx.co.uk/ Pls come back and let us know if this solved your problem.

The passcode for Jabra bluetooth is 0000

try 0000

default passcode is usually 0000

Try using the pass code of either six zeros or eight.

Good Day,

Passcode is "0000"

Hope this helps