Im getting spots projecting on image - ViewSonic PJ556D DLP Projector

The DLP Chip is failing .The DLP or Digital Light Projection Chip contains up to 8 million tiny microscopic mirrors that tilt to project a digital image onto the screen. These mirrors are failing causing light and dark spots to appear.Unfortunately fixing this projector is probably going to cost more than buying a new one. Hope this helps.

The bad news is that the spots are pretty much fatal. the image engine is failing and will only get worse, the repair cost is greater than the cost of a replacement tv.

Hi , it seems you are experimenting a light engine problem.Here's how your tv works: http://www.youtube.com/watch?v=ZLLHnQ4y-wo Basically there's 3 LCD chips that create the colors and image by blending together.When these chips start to melt you will get those blue spots, pixilation even vertical lines.You will need to replace the light engine. Have a blessed one!

The convergence ckt is failing. Ususally the ICs known as STKs and sometimes resistors in the ckt burn up too. this link : TvRepairKits has the parts needed and step by step instructions on the repair if you want to try it yourself. Good luck.

Hi,that's an issue with the light engine.Basically there's 3 chips blue,green and red they create the image on the tv ,when they start to fail you'll get those spots all over, mostly in the corners.God bless you!

Its an acrylic condensing lens inside the light engine that has melted/warped. You have to pullout the entire light engine then disassemble the optical light tunnel to get too the lens. Then you need a lens-smith to cut a new lens because Infocus won't stand behind this design flaw. Its really a shame on Infocus!

If you need more info contact us here: click here

you cant remove those spots as they are referred to as 'dead pixels'
im guessing your warranty is already finished, so you'll have to get in touch with the manufacturer and they might be able to give you a few names of places that can fix this in your area.
also, unfortunately, the only way you can prevent anymore would be to stop using that tv. :(

This is probably the polarizing filter. It will need to be replaced. It should not cost very much to fix.

Bad Light Engine Call UED 1-800-648-6657 ask for rebuilt.

take your tv to a tech and have them check your tv the color module could be the problem or the the convergence module.good luck.