There are not messages in the voice mail but the indicator light won't stop flashing.
I have a Uniden 5.8 GHz and the message indicator light will not stop flashing. The phone screen says I have a voice mail but I don't. Does anyone know to fix it?
FIX: Play back old saved and/or outgoing messages on the BASE. While it's playing hit Delete (trash can icon).
Uniden phones will stop blinking.
cheers.
SOURCE: GE 28128
Call your phone from another number and leave a message. Then, check your voice mail, delete the message, and hang the phone up. That should cause the blinking to stop. It worked for me!
SOURCE: tmc4000 voicemail light no longer flashing when messages are waiting
First of all here is a link to the manual for you ...enjoy !
http://www.sellcom.com/ET4000%20users%20guide%20%20v7%20090803.pdf
On page 72 there are instructions for re-setting all programmed features to default, then you can start afresh...good luck
SOURCE: New Voice Mail flashing light
What worked for me was to call my phone from another phone and leave myself a voicemail. I then called into my voicemail, listened to and deleted the message. This reset my handsets so the New Voicemail indicator is no longer flashing.
Hope that helps!
SOURCE: voice mail indicator light is always on
I have 6 of these phones. No problem for a year or so, then one phone
got the message light stuck on. Tried some online suggestions without
success. Powering down etc. failed to fix it so I stuck a piece of tape
over the led.
A couple of weeks ago line 2 failed (externally) and ATT sent a tech
out who repaired it and also cleaned up the line. When the line came
back, all 6 phones had the message light stuck on!
Talked with the tech here and with the ATT support and nothing worked.
Eventually the tech here left as it was not a line fault - but he said
he would leave the problem open.
That evening a young ATT guy called. He tried a number of different
settings and changes - he was really determined! He called Kentucky and
Minnesota and part of the advice was "give up and don't call the
customer back"!
Finally he found a configuration option in the central office switch
(exchange) for the line called CWMI (Call Waiting Message Indicator).
Apparently this option was originally active but was changed when the
local trunk was upgraded to fibre over the last year or so.
Once he enabled this option (we have call waiting and caller ID on call
waiting on this line), the message lights on all the phones turned off
and have worked normally since (10 days), including the one that was
"broken" for over a year!
I really credit the tech with persistance on the issue.
Hope this helps someone else out there.
Regards, Hugh
SOURCE: New Voice Mail flashing light
What worked for me was to call my phone from another phone and leave myself a voicemail. I then went in and retrieved and deleted that voicemail. Once I hung up from my voicemail service my handsets reset about 10 seconds later.
I hope this helps!
3,551 views
Usually answered in minutes!
What model number?
×