Problem with canon printer/scanner

Open Solution menu from your desktop and choose Scanning Photos. Now put you photo on scanner board and press preview from your solution menu. After preview completing press scan... thanks

the scanner doesnot work like that. when you load the all in one driver cd, the scanner driver loads with it. there should be a scanner icon somewhere on the desktop or in my computer. it onlt scans from the computer by putting the document on the glass and press scan button on computer and it will scan and save on the pc.

Something is wrong with the scanner or communication to the scanner

Hi, please get new driver here: www.driversdown.com/
www.nodevice.com/driver/company/Canon/Printer.html
www.usa.canon.com/cusa/office/products/.../hs_1200ts

Jay kwcp

Hİ,
First You must install "MP Navigator EX" program to your Pc..and then you can control every feature of the scanner from your computer..(not from scanner...)
This program normally comes with the MX300 as CD ,if not you can download from Canon support page....Good luck..Regards

Hi, please get new driver here: www.driversdown.com/
www.nodevice.com/driver/company/Canon/Printer.html
www.usa.canon.com/cusa/office/products/.../hs_1200ts

Jay yvgftd

Make sure the scanner is connected to your laptop/PC before you press 'scan' and is turned on.
Pressing the scan option will start Canan's software MP Navigator for scanning. You can also start MP Navigator on your PC and then start scanning directly from your program or from the printer button.

Make sure the scanner is connected to your laptop/PC before you press 'scan'.
Pressing the scan option will start Canan's software MP Navigator for scanning. You can also start MP Navigator on your PC and then start scanning directly from your program or from the printer button.

Scan from the scanner and camera wizard, the front scan button is useless. Go to My computer, open the scanner icon and scan from there, no need to use the button at all.

You may have a printer driver error.

Remove the USB cable from the PC.

Uninstall the printer from Add/Remove Programs from control panel.

Get your printer driver with the CD that came with it and install the printer again. Or download latest printer driver from canon - type "canon mp510 driver" into google.

Install new driver.

If its still not working, it may just be a connection problem between your computer and the scanner - check the USB cable is ok.

If its not that (more than likely not) then the workaround is to go into MPNavigator on your PC (start programs, printers, Canon MP510, Canon Utlilities, MP Navigator 3.0 (or whatever version ures is ))

then you need to set a short cut to that... it allows you to scan directly from that program.


Hope it works