There are two identical sized small buttons on the top. Push the one nearest the picture-taking button until it says self-timer. Push the picture-taking button. The display should show a countdown until the timer takes the picture.
SOURCE: HOw do I turn on the self timer
Hi - You can download the manual by clicking the link underlined in blue below:
DiMage Z1
See page 47:
Please take a moment to rate this solution & let us know if the information given was useful to you - Good Luck!
Informatica
SOURCE: using self timer on my digital camera
1 In any Still mode, tap Settings to open the Settings
panel.
2 Tap Self-Timer/Burst repeatedly, until the desired
Self-timer icon appears at the bottom of the LCD:
10 seconds—A picture is taken after a 10-second
delay (so you have time to get into the scene).
2 seconds—A picture is taken after a 2-second
delay (for a steady, auto-shutter release on a
tripod).
2 shot—The first picture is taken after a 10-second
delay. A second picture is taken 8 seconds later.
3 Compose the scene. Press the Shutter button halfway, then completely down.
The camera takes the picture/pictures after the delay.
SOURCE: Can't find canon powershot a560 self timer
when in picture mode, press "set" then go to "drive mode" and choose either 10 or 2 seconds
SOURCE: EOS Rebal XS stuck on self-timer
1)Press the left arrow key (which is located to the left of 'SET' button at the back of camera). It has clock pictogramm near it.
2)Use left/right arrow key to select square pictogramm to set drive mode to single shooting.
3)Press SET button to confirm your choice.
120 views
Usually answered in minutes!
×