How to change the display settings for MC9090-G RF Scanners

We recommend you contact Motorola Solutions.

http://www.motorolasolutions.com/support

Mark
Motorola Mobility Support

In order to get more assistance about how to change the settings on your Motorola MC9090, you can visit the website:

On an MC9090, with the battery removed, hold both power and trigger down, then insert the battery, and keep holding both buttons down. Wait for the onscreen display.

CAN YOU NOT RECONFIGURE THEWINDOWS SETTINGS / ADD ADMINISTRATOR SETTING LIKE ON A LAPTOP?

Cold boot is a system reset which includes also the time. You could use an application or script to set the correct time after an cold boot.

Take out the battery, press and hold the power button and trigger for 30 sec and push back the battery the release the buttons.

If you are within the UK we have a stock of replacement displays, colour and mono, and digitisers.

If you need any more help then please do not hesitate to contact us:-

http://www.biastechnology.com/

or TEL +44(0)1202 620955

She's Broken...contact your dealer or the Motorola Help Desk at 1-800-653-5350.

It appears you device can not gain access to you DHCP server to obtain an IP address.

Simple solution would be to assign a static IP and then test.

Do the intermec scanners obtain there IP address's vias DHCP?

If you need any further assistance then please contact us

www.biastechnology.com

[email protected]

A - From the Windows Mobile user interface:

1. Tap Start (the Windows Logo), then Settings.
2. Tap the System tab.
3. Tap the Power icon.
4. Tap the Advanced tab.

You can change the number of minutes before power is turned off when on battery and when on external power from there. You can also uncheck the "Turn off device if not used for" check box to disable the timeout entirely.


B - From the registry (useful for deploying the setting as a .reg file to the device, in case you have many MC9090 guns you are supporting or you are wanting to set it to a value the user interface does not support):

[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Power\Timeouts]
"BattSuspendTimeout"=dword:00000000
"ACSuspendTimeout"=dword:00000000

The above values are in hex and represent the number of seconds before timing out when on battery or AC power. For example, to set the BattSuspendTimeout to 180 seconds, you would set it to dword:000000B4. To disable it entirely (the equivalent of unchecking the checkbox in the user interface), set the value to 0.

Thanks,

Brad Radaker
Radicomm, Inc.
(makers of QuickTalk - push-to-talk over WLAN for MC9090)
www.radicomm.com