How can i program the Humax remote control (RM-F01) to work with my Sony TV and DVD

The "rm ed007" remote that you mentioned is most likely a universal remote control, which can be programmed to control multiple devices, including your Sony DVD player and Sony Bravia TV.
To program the remote to control your Sony DVD player, you can follow these steps:

1. Turn on your Sony DVD player.
2. Locate the code for your Sony DVD player in the code list provided with the universal remote.
3. Press and hold the "Code Search" or "Setup" button on the universal remote until the indicator light turns on.
4. Enter the code for your Sony DVD player using the number buttons on the remote.
5. Test the buttons on the remote to make sure that they are controlling the Sony DVD player as expected.

To program the remote to control your Sony Bravia TV, you can follow these steps:

1. Turn on your Sony Bravia TV.
2. Locate the code for your Sony Bravia TV in the code list provided with the universal remote.
3. Press and hold the "Code Search" or "Setup" button on the universal remote until the indicator light turns on.
4. Enter the code for your Sony Bravia TV using the number buttons on the remote.
5. Test the buttons on the remote to make sure that they are controlling the Sony Bravia TV as expected.

Normally repairing circuit boards to remote controls will be very difficult. Even though you get it repaired, the repairing cost might exceed the price of a new one.

I had exactly the same problem with my Humax remote RM-F01
, I just changed the batteries and it was fine after that..I think because you use one remote for all and batteries are only AAA's, they dont last as long, get some duracells.

Hello
Four digit universal remote codes for Sony TV with Humax Foxsat remote are:

0037, 1505, 0036, 1925, 1825, 1751, 1685,

1651,1625, 1551, 1317, 1010, 0834, 0810,
0353, 0074,0011
Three digit codes are:

006, 301, 005, 446, 412, 393, 375,

360, 325, 255, 203, 185, 174, 058,
003
OK.

What are you trying to control with the remote? Try pressing the button on the remote that corresponds to the device you are trying to control first, and then try the remote again. I hope this helps, and good luck! Der Strom

nor do they for the TX-32LMD70A.

Anyone got a solution. I hate two controllers.

the code is 1323 to manage and operate the HT-Q20

The RM-U185 remote control is not programmable and remote codes are not required. This remote is designed to control the product that it originally came with. If the remote has buttons for other product types (TV, DVD, etc.), it can control only Sony branded versions of these products. Please note that this remote may not be able to control all models of these other Sony product types.

BEKO TV CODE HELP

I need the code for operating an emerson television