My new Cellular headset HFBLU-1K won't work or recharge

i have a i phone 4 and i need pin code will not pair. and don't see it in manual Bluetooth blue star hfblu-1k

The passkey is just "0000" without the quotes of course.

Please make sure you rate my answer 4 thumbs up, it is extremely important to me. I would be forever grateful if you could do so. If you need more help on this question please just respond to my answer here and I will get right back to you.


Thanks
Tim

paired/connected, made a call, could not hear each other

That usually means it isin pairing mode. Charging some headsets from extended periods can sometimes reset the device requiring you to pair the device again.

go to your phone and turn on your blue tooth.that might be the problem.

i am the manufacturer of this unit and a car charger for this unit was never made. any car charger you may find and use with this item would be at your own risk and the item would no longer be warrantied by us.

Hi

These instructions should work for pairing your bluetooth device

1. First turn OFF the Bluetooth Headset
2. Place the Headset within a distance of 1 Foot of your phone.
3. Hold down the power key for about 8 seconds until indicator light blinks and starts to alternate between red and blue. This shows it is in pairing mode
4. Set your phone to search for a bluetooth device.
5. Select HFBLU-1K in the bluetooth device list and if required enter the password 1234


Hope this helps. Do let me know how you get on and remember to rate my answer. Thanks.

you do not have to reset it to pair it with another device. you simply have to put the earpiece into pairing mode again as you did with the first phone and follow the same steps you used initially to pair it to the device that broke.

headset won't pair with me phone and i have tried 0000 and 1234 and 12345

Canadian Tire's HFBLU-LT100 (BK-600) won't connect to my SPH-m300 Samsung phone but I entry of the passcode (0000) about 20 times before it connect successfully.