I have GE 25942EE4-c I can't get it to replay in English

You need to ask or explain your Problem. I'd be glad to help if the subject is in your Inquiry. _Ned_

Well, it seems like it is already in English, but the spanish wasn't translated because of malfunctions that who knows what happened, for setting caption should be off unless you want text, voices of blind people sounds like the program on t.v. you recorded.

go into the main menu on the machine and set the language to english

Can you rewrite your post/question in standard English phrasing please?

you just need to set them in the main base for a few seconds

1. Make sure the answering system is ON.
2. Press fash/answerer/call waiting button on the handset to enter answerer remote
mode.
3. Press key [8] to enter Time/Day set menu on handset.
4. To set Hour, key in [00]-[12].
5. To set Minutes, key in [00]-[59].
6. To set AM/PM, press the CALLER ID-VOLUME (5or6) button.
7. Press #PAUSE/ringer button to confrm the setting.

CL means, you need to set the MIN, HOUR, DAY/CHECK. These buttons are on the back of the unit. You need to start with MIN, then HOUR and last DAY/CHECK. Hold the MIN button down to start the set up. You release the button on the correct selection. The button is slow to react, you might need to circle around to get the correct timing to release your figure from the button. The same with the other buttons. I was very glad to stop the flashing of the CL and number of calls on the answering machine. (my house lost power and all the clocks needed to be reset, this was the biggest clue. So CL either means CLOCK or CLUE.)

static.compusa.com/pdf/GE-25942EE4-Manual.pdf see the manual

Way too easy :-)

When you were listening to messages you probably pressed the SKIP button for longer than 2 seconds. Try pressing it and holding it again and see what happens.

Here's the manual link: http://www.home-electronics.net/ge/pc/IB/25942GE3_IB.pdf

Carl

On the GE web site.

http://www.home-electronics.net/ge/pc/IB/25942EE4_IB.pdf

Carl