Kkeyboard tyypiing doublle lettters when I TYPE< AND GOES TO CAPITALS WITHOUT HITTING THE KEEY< NUMBERS DON"T WORK GET !@##$$%<< ccan"t get it to wworrk< punctuation kkeeys don"t workk either>

Restart your computer repeatedly tapping the f8 key to enter safe mode while the screen is black once in safe mode where the only things working will be your keyboard and mouse allowing you to attempt to repair your computer
As the computer is booting repeatadly press the F8 key as the computer is booting If done properly the user should get to a screen similar to the below screen. Select the option for Safe mode command prompt only Windows Advanced Options Menu
Please select an option: Safe Mode
Safe Mode with Networking
Safe Mode with Command Prompt Enable Boot Logging
Enable VGA mode
Last Known Good Configuration (your most recent settings that worked)
Directory Services Restore Mode (Windows domain controllers only)
Debugging Mode Start Windows Normally
Reboot
Return to OS Choices Menu Use the up and down arrow keys to move the highlight to your choice. select safe mode with command prompt Then type at the C:\> prompt: type

DEBUG

and hit Enter. You'll see a dash (-) at the DEBUG prompt. Now type:

o 70 2e

which will show as -o 70 2e at the DEBUG prompt. Hit Enter. Then type:

o 71 ff

and hit Enter. Finally type:

Quit

and hit Enter one last time to quit DEBUG back to the C:\> prompt.
Now you're ready to reboot your PC, and press the appropriate key or key
combo (look it up in your motherboard manual if you don't know it) to access
your BIOS Setup. Youll notice the password is gone. If this fails try typing At command prompt type debug
you will get a - prompt where you can type the following (<enter> means press enter, not type enter*)

A <ENTER>
MOV AX,0 <ENTER>
MOV AX,CX <ENTER>
OUT 70,AL <ENTER>
MOV AX,0 <ENTER>
OUT 71,AL <ENTER>
INC CX <ENTER>
CMP CX,100 <ENTER>
JB 103 <ENTER>
INT 20 <ENTER>
<ENTER> just hit enter on this line
G <ENTER>
Q <ENTER> Basic BIOS password - works 9.9 times out of ten
If this fails you will need to Select safe mode with networking to download you could download all of these or just one save them to a usb drive for later use if one fails to remove the password http://www.tech-faq.com/reset-bios-password.html At some stage you might need to press Ctrl+Enter rather than just Enter if on a Dell Latitude E5410 http://majorgeeks.com/CmosPwd_d239.html A CMOS BIOS password recovery tool Editors note: This tool should only be used by experienced computer users. Please see the enclosed read me if you would like to run it from Windows. Failure to follow instructions (from Windows) will cause your anti-virus to flag this as a virus.

restart your computer repeatedly tapping the f8 key to enter safe mode while the screen is black once in safe mode where the only things working will be your keyboard and mouse allowing you to attempt to repair your computer

Reboot the computer As the computer is booting repeatadly press the F8 key as the computer is booting

If done properly the user should get to a screen similar to the below screen.

Select the option for Safe mode command prompt only

Windows Advanced Options Menu
Please select an option:

Safe Mode
Safe Mode with Networking
Safe Mode with Command Prompt

Enable Boot Logging
Enable VGA mode
Last Known Good Configuration (your most recent settings that worked)
Directory Services Restore Mode (Windows domain controllers only)
Debugging Mode

Start Windows Normally
Reboot
Return to OS Choices Menu

Use the up and down arrow keys to move the highlight to your choice.

select safe mode with command prompt

Then type at the C:\> prompt: type

DEBUG

and hit Enter. You'll see a dash (-) at the DEBUG prompt. Now type:

o 70 2e

which will show as -o 70 2e at the DEBUG prompt. Hit Enter. Then type:

o 71 ff

and hit Enter. Finally type:

Q

and hit Enter one last time to quit DEBUG back to the C:\> prompt.
Now you're ready to reboot your PC, and press the appropriate key or key
combo (look it up in your motherboard manual if you don't know it) to access
your BIOS Setup.

Youll notice the password is gone.

if this fails try typing

At command prompt type debug
you will get a - prompt where you can type the following (<enter> means press enter, not type enter*)

A <ENTER>
MOV AX,0 <ENTER>
MOV AX,CX <ENTER>
OUT 70,AL <ENTER>
MOV AX,0 <ENTER>
OUT 71,AL <ENTER>
INC CX <ENTER>
CMP CX,100 <ENTER>
JB 103 <ENTER>
INT 20 <ENTER>
<ENTER> just hit enter on this line
G <ENTER>
Q <ENTER>
Basic BIOS password - works 9.9 times out of tenhope this helps

restart your computer repeatedly tapping the f8 key to enter safe mode while the screen is black once in safe mode where the only things working will be your keyboard and mouse allowing you to attempt to repair your computer

Reboot the computer As the computer is booting repeatadly press the F8 key as the computer is booting

If done properly the user should get to a screen similar to the below screen.

Select the option for Safe mode command prompt only

Windows Advanced Options Menu
Please select an option:

Safe Mode
Safe Mode with Networking
Safe Mode with Command Prompt

Enable Boot Logging
Enable VGA mode
Last Known Good Configuration (your most recent settings that worked)
Directory Services Restore Mode (Windows domain controllers only)
Debugging Mode

Start Windows Normally
Reboot
Return to OS Choices Menu

Use the up and down arrow keys to move the highlight to your choice.

select safe mode with command prompt

Then type at the C:\> prompt: type

DEBUG

and hit Enter. You'll see a dash (-) at the DEBUG prompt. Now type:

o 70 2e

which will show as -o 70 2e at the DEBUG prompt. Hit Enter. Then type:

o 71 ff

and hit Enter. Finally type:

Q

and hit Enter one last time to quit DEBUG back to the C:\> prompt.
Now you're ready to reboot your PC, and press the appropriate key or key
combo (look it up in your motherboard manual if you don't know it) to access
your BIOS Setup.

Youll notice the password is gone.

if this fails try typing

At command prompt type debug
you will get a - prompt where you can type the following (<enter> means press enter, not type enter*)

A <ENTER>
MOV AX,0 <ENTER>
MOV AX,CX <ENTER>
OUT 70,AL <ENTER>
MOV AX,0 <ENTER>
OUT 71,AL <ENTER>
INC CX <ENTER>
CMP CX,100 <ENTER>
JB 103 <ENTER>
INT 20 <ENTER>
<ENTER> just hit enter on this line
G <ENTER>
Q <ENTER>
Basic BIOS password - works 9.9 times out of tenhope this helps

restart your computer repeatedly tapping the f8 key to enter safe mode while the screen is black once in safe mode where the only things working will be your keyboard and mouse allowing you to attempt to repair your computer

Reboot the computer As the computer is booting repeatadly press the F8 key as the computer is booting

If done properly the user should get to a screen similar to the below screen.

Select the option for Safe mode command prompt only

Windows Advanced Options Menu
Please select an option:

Safe Mode
Safe Mode with Networking
Safe Mode with Command Prompt

Enable Boot Logging
Enable VGA mode
Last Known Good Configuration (your most recent settings that worked)
Directory Services Restore Mode (Windows domain controllers only)
Debugging Mode

Start Windows Normally
Reboot
Return to OS Choices Menu

Use the up and down arrow keys to move the highlight to your choice.

select safe mode with command prompt

Then type at the C:\> prompt: type

DEBUG

and hit Enter. You'll see a dash (-) at the DEBUG prompt. Now type:

o 70 2e

which will show as -o 70 2e at the DEBUG prompt. Hit Enter. Then type:

o 71 ff

and hit Enter. Finally type:

Q

and hit Enter one last time to quit DEBUG back to the C:\> prompt.
Now you're ready to reboot your PC, and press the appropriate key or key
combo (look it up in your motherboard manual if you don't know it) to access
your BIOS Setup.

Youll notice the password is gone.

if this fails try typing

At command prompt type debug
you will get a - prompt where you can type the following (<enter> means press enter, not type enter*)

A <ENTER>
MOV AX,0 <ENTER>
MOV AX,CX <ENTER>
OUT 70,AL <ENTER>
MOV AX,0 <ENTER>
OUT 71,AL <ENTER>
INC CX <ENTER>
CMP CX,100 <ENTER>
JB 103 <ENTER>
INT 20 <ENTER>
<ENTER> just hit enter on this line
G <ENTER>
Q <ENTER>
Basic BIOS password crack - works 9.9 times out of tenhope this helps

some manufacturers use there own name as the bios password
try phoenix is this fails

restart your computer repeatedly tapping the f8 key to enter safe mode while the screen is black once in safe mode where the only things working will be your keyboard and mouse allowing you to attempt to repair your computer

Reboot the computer As the computer is booting repeatadly press the F8 key as the computer is booting

If done properly the user should get to a screen similar to the below screen.

Select the option for Safe mode command prompt only

Windows Advanced Options Menu
Please select an option:

Safe Mode
Safe Mode with Networking
Safe Mode with Command Prompt

Enable Boot Logging
Enable VGA mode
Last Known Good Configuration (your most recent settings that worked)
Directory Services Restore Mode (Windows domain controllers only)
Debugging Mode

Start Windows Normally
Reboot
Return to OS Choices Menu

Use the up and down arrow keys to move the highlight to your choice.

select safe mode with command prompt

Then type at the C:\> prompt: type

DEBUG

and hit Enter. You'll see a dash (-) at the DEBUG prompt. Now type:

o 70 2e

which will show as -o 70 2e at the DEBUG prompt. Hit Enter. Then type:

o 71 ff

and hit Enter. Finally type:

Q

and hit Enter one last time to quit DEBUG back to the C:\> prompt.
Now you're ready to reboot your PC, and press the appropriate key or key
combo (look it up in your motherboard manual if you don't know it) to access
your BIOS Setup.

Youll notice the password is gone.

if this fails try typing

At command prompt type debug
you will get a - prompt where you can type the following (<enter> means press enter, not type enter*)

A <ENTER>
MOV AX,0 <ENTER>
MOV AX,CX <ENTER>
OUT 70,AL <ENTER>
MOV AX,0 <ENTER>
OUT 71,AL <ENTER>
INC CX <ENTER>
CMP CX,100 <ENTER>
JB 103 <ENTER>
INT 20 <ENTER>
<ENTER> just hit enter on this line
G <ENTER>
Q <ENTER>
Basic BIOS password crack - works 9.9 times out of tenhope this helps

Be sure the L/O tape is correctly installed. Goto BROTHER.com, click on support, poke around and you will find a manual.

DickyO

If I'm wright and your can hase immobiliser/code keey,you need to go to the VW group service with car/owners paper, VIN number is the most important, and order original new keey from VW because yor car hase immobilizer and wont start without chip in the original keey

The correction tape may be installed wrong, or it may be a tacky L/o that will stick nand not raise up..
You can find a manual at BROTHER.COM, click on support.


DickyO

Use asci code:
char input[]; or string

if(intput[0] <=90 && input[0] >=65) write capital
if(intput[0] <=122 && input[0] >=97) write small
or easy:
if(intput[0] <='Z' && input[0] >='A') write capital
if(intput[0] <='z' && input[0] >='a') write small

input[0] it's the first letter.
If you wanna use the asci press and hold alt then input the number in the Num Lock from the right (only!!) then relyse the alt the it's will write the char from the asci you write.
Rate me please, thanks.