Cannot transfer photos from c340 camera

Windows and Mac included since you did not specify

KODAK EASYSHARE G600 Printer Dock Firmware WINDOWS Operating Systems

KODAK EASYSHARE Software WINDOWS Operating Systems

KODAK EASYSHARE Printer Docks and Photo Printers Printer Driver MACINTOSH...

KODAK EASYSHARE Software MACINTOSH Operating Systems

Mary, you can download the software from http://download.Kodak.com/digital/software/easyShare/v8_3_0/install_easyshare.exe

Press the SAVE button, find a place on your hard drive and save the file. Double click the install_easyshare.exe file and it will install the file. Follow the instructions below.

The file is good for KODAK EASYSHARE Software - WINDOWS Operating Systems
Installation Instructions

1. Verify that your computer meets the system requirements. NOTE: APPLE QUICKTIME Player is required for some software features. Visit APPLE to download the latest version of the QUICKTIME Player.
   
2. Disconnect all accessory devices from your computer (digital camera, camera dock, printer dock, photo printer, card reader, etc.).
3. Verify that you logged on to the computer using the administrator account.
4. Close all programs.
5. Download the software, then follow the on-screen instructions to install the software.
6. To launch the software select Start > Programs > Kodak > Kodak EasyShare > Kodak Easyshare software.

IMPORTANT: If you have a large picture collection, allow a few minutes after your computer restarts before starting EASYSHARE Software. EASYSHARE Software windows appear after your previous picture catalog has been updated

After the installation are completed, reboot if not asked to do so. You can copy the install_easyshare.exe file to a CD for later installation if needed.

Good luck and post back to let me know how it went.

Hello,

Here is the software for the camera:

EasyShare Software

1. Verify that your computer meets the system requirements. NOTE: APPLE QUICKTIME Player is required for some software features. Visit APPLE to download the latest version of the QUICKTIME Player.
   
2. Disconnect all accessory devices from your computer (digital camera, camera dock, printer dock, photo printer, card reader, etc.).
3. Verify that you logged on to the computer using the administrator account.
4. Close all programs.
5. Download the software.
6. When the download is complete, select Start > Programs > Kodak > Kodak EasyShare > Kodak Easyshare software.

Hi lomls3,
Are you using Kodak Easyshare ver8? If not, you may need to update the software in order for Vista to send the print jobs to the Kodak G600 printer.
Update the software to ver 8 first. Reboot the computer and retry printing.
Ver 8 can be downloaded here: http://www.opendrivers.com/driver/293165/kodak-digital-camera-kodak-easyshare-software-update-8.0-windows-2000-xp-vista-win7-free-download.html
Hope this helps.
Andrew

The Kodak camera dock provides automatic battery charging and automatic connection to your computer when the camera is "docked." There is also a version of the dock that includes a printer, but I have found the printer to be poor quality and very unreliable. The dock must be connected to the computer via USB, and the Kodak EasyShare software must still be installed. The dock is a very handy accessory, but it will not solve your problem. What might help though is a visit to Kodak.com where you can get a free download of the latest EasyShare software that is correct for your operating system.

KODAK still repair your product: OoW repair price: 48,44 pounds.

Contact KODAK:
http://www.kodak.com/eknec/PageQuerier.jhtml?pq-path=14563&pq-locale=en_US&_requestid=3490

Hi. it's only possible if you use a separate card reader and put them in the DCIM folder once you open them under My Computer.

You cannot transfer it back from the computer to the camera directly. Not possible for kodak

If you are using Windows XP unplug your camera from your PC and uninstall the Kodak software. You don't need it to transfer photos to your PC. The next time you connect your camera (turn the camera on) to your computer it should recognize it and you can use Windows built in transfer software. Details are here:http://www.organizepictures.com/2006/11/5-easy-steps-to-transfer-your-pictures-using-windows-xp-photo-wizard

if u are using windows xp, then it will automatically open a window on the computer as soon as camera is hooked up through the usb port and turned on.Then a list of icons will appear and u need to choose which particular step u should take. Did u try this ? it works automatically for all cameras.

Kodak has been making a lot of changes to that program, due to problems. If you loaded the software that came with the camera, it is very likely out of date. You need to visit the Kodak website and download the latest version of the software.