PCS 127 does not heat up. Fan and preheat start.

please post the model Number here..so i can look it up but just off hand there maybe an oven sensor (thermistor) problem this in inside the oven and tells the electronic ctrl board what the actual temp is in the oven it says 135 beacause it will until the temp reachs that after that as the temp goes up it will read 140 150 160 .. and so on until it reachs the set temp .. Is the oven getting hot and are there any fault codes coming up??

Hello, Cristina -

Since you have not stated the make and model of your oven, all I can advise is for you to turn your oven on and set it to the desired temperature and wait for 10 - 15 minutes until the oven comes up to the full heat temperature.

You can read the instructions here, if you wish:
https://www.wikihow.com/Preheat-an-Oven

Best wishes.

replace the heating element

More than likely, its your oven thermometer thats taking a half hour to read correctly. The oven is probably getting there sooner. If you had a digital thermometer, the read would come quicker. So save your money,nothing wrong with your stove.

We have the exact same problem. It doesn't heat to above 135. Help!!

The problem looks like a faulty electronic control. When you select baking, the broiling element should not come up.

Before replacing control assembly, test the temp probe located inside the cavity, check the wiring harness to temp probe and elements, and ensure that the fan is working if the oven is fan assisted.

There is an element that circles the rear fan, this is the common element and the most powerful.
Once you have the lid off, it's quick to test continuity on all elements.
Hope this helps
john

To preheat oven just select the temp you intend to cook at and wait until the red light goes out,it is then preheated
Then you can put your food in and carrying on cooking.
Yes you do put it on fan symbol, but make sure it is on the right one , as some ovens have fan only as well as fan and heat.
Plz rate this solution.
thanks.