Clickstart game "Diego" uses symbols that kids are supposed to find on their keyboard but their keyboard only has letters and numbers and the game will not allow you cannot move until you find the symbol

There are a few different ways to type the degree

1. Use the keyboard shortcut: Press and hold the Option key, then press the letter K on your keyboard. This will insert the degree symbol.
2. Use the character viewer:

• Go to the Edit menu and select Emoji & Symbols.
• In the search field, type "degree".
• Double-click the degree symbol to insert it into your document.

1. Use the ASCII code:

• Press and hold the Option key and the Shift key.
• Press the number 8 on the numeric keypad. This will insert the degree symbol.

I hope this helps! Let me know if you have any other questions.

When you are on the letters virtual keyboard and want to enter a number or a symbol, tap on the box marked '123' or '123Sym'. That brings up the numbers+symbols virtual keyboard. After entering the number(s) or symbol(s), tap on the box marked 'ABC'. That will bring back the letters virtual keyboard.

there should be the symbol Fn on the lower left part of the keyboard. you press that for the blue numbers, letters, etc..

You can buy expansion packs that have other characters like Dora, more Scout etc. I'm not exactly sure what other characters they have or if they have Diego or Cars.

Try this. Touch Keypad simulates a wireless phone keypad on the touch screen to allow you to enter text, numbers, and symbols just as if you were using a wireless phone keypad. Touch Keyboard simulates a 20-key QWERTY (typewriter) keyboard on the touch screen to allow you to enter text, numbers, and symbols similar to the way you would using a QWERTY keyboard. To use Touch Keypad or Touch Keyboard:  In a program, tap the Input Selector arrow, and then tap Touch Keypad or Touch Keyboard. To type lowercase letters, tap the keys on the dial pad or keyboard. To type a single uppercase letter, tap the Shift key and then tap the corresponding key. To type all uppercase letters, tap the Shift key twice. To change back to all lowercase letters, tap again. To enter a space after the word, tap the Space key. To start a new line, tap the Enter key. To backspace and delete a single character in any input mode, press the Back key. To open the Symbol pad, tap the Symbol key. To change the input mode:  Tap the Input mode key to switch to a different input mode: XT9 (predictive), Multitap (abc), or Numeric (123).

Hope this helps, let me know if this works or if I can help you with anything else.
JimmyC

You could actually check from the dell support site for this...
http://support.dell.com/support/edocs/systems/ins8200/en/sm_en/index.htm

You need to press the NumLock key to get the keyboard to get back to alphanumeric - it has a symbol of a lock with a number 1 on it. A LED should also go out/icon in your tool tray should disappear as well.

its under i think the number 1 or */#. try either i think thats where they are. otherwise you can actually add letters and symbols etc. to the keyboard via download, from anywhere like try google.

With my IBM Thinkpad, I had to hold Shift+ScrLk to turn off Number Lock.

You blew the circuit board by putting to much power into it. Never use more power then suggested for this reason. All adaptors have a volt and an amp rating. Sorry it happend best wishes!