At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
I've had it for 2 years without problems. I woke up this morning and the unit was dead. No lights, nothing. I've tried all basic solutions such as power cord, outlet...etc.
I have the exact same problem, and about the same age (2 yrs). I already took the top off an inspected all of the fuses, there does not seem to be any that are blown. All wires look in good shape, no corrosion. Any ideas? I'll be pretty p'd if this died after only 2 years for what I spent for it.I have the exact same problem, and about the same age (2 yrs). I already took the top off an inspected all of the fuses, there does not seem to be any that are blown. All wires look in good shape, no corrosion. Any ideas? I'll be pretty p'd if this died after only 2 years for what I spent for it.
Reading the post my problem is similar but I not sure the same. I get the standby light to stay on but I don't get anything on the display screen or any picture or sound. Is this a fuse? Thanks,
Reading the post my problem is similar but I not sure the same. I get the standby light to stay on but I don't get anything on the display screen or any picture or sound. Is this a fuse? Thanks,
Reading the post my problem is similar but I not sure the same. I getthe standby light to stay on but I don't get anything on the displayscreen or any picture or sound. Is this a fuse? Thanks, Reading the post my problem is similar but I not sure the same. I getthe standby light to stay on but I don't get anything on the displayscreen or any picture or sound. Is this a fuse? Thanks,
AnonymousJan 29, 2009
ditto
ditto
You can't post conmments that contain an email address.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Make sure the control feature is disabled on both units so that they are not trying to send control signals to each other.
Secondly make sure your input is configured to hdmi for both audio and video within the receivers on screen menu The receiver usually auto senses the digital audio signal but doesn't automaticly know that it should use hdmi for video.
If your using HDMI, pull it from the receiver and run directly to the TV, then run optical or digital coaxial to your receiver. It's referred to in the industry as a "Handshake" issue. It has to do with firmware and hardware of your receiver and continuous ridiculous updates from the recording industry to protect copyright. Hope this helps. If you still have issues, post a comment and I will help you troubleshoot further.
Your receiver has short circuit somewhere. The protection circuit shut off the unit to prevent more damage. You can try to disconnect all speakers. If there is not improvement, you need to send your receiver to repair.
hi it is an amp module failure inside £129.00 plus vat 4 hours to replace total strip out £380.00 total to do these are made by samsung and rebadged horrible things dump it thats my advice regards kirk
Geesh! Finally found it in that encyclopedia of an instruction manual. If you have the manual, the solution is on page 63. If not, I'll provide an attached image below.
I have the exact same problem, and about the same age (2 yrs). I already took the top off an inspected all of the fuses, there does not seem to be any that are blown. All wires look in good shape, no corrosion. Any ideas? I'll be pretty p'd if this died after only 2 years for what I spent for it.
Reading the post my problem is similar but I not sure the same. I get the standby light to stay on but I don't get anything on the display screen or any picture or sound. Is this a fuse?
Thanks,
Reading the post my problem is similar but I not sure the same. I getthe standby light to stay on but I don't get anything on the displayscreen or any picture or sound. Is this a fuse?
Thanks,
ditto
×