Problem with Nortel WLan handset 2210

Les,

If you want to delete the actual voice mails, you have to go through your phone company (using their keypad commands) since voice mail is only accessible through your phone (but the voice mail messages are stored through your phone company provider).

Info from the Uniden DECT 6.0 6035 Manual:

Using the Voice Mail Service If you subscribe to a voice mail service, you can use your phone to access your voice mailbox. The new message LED on the handset ?ashes and VM appears in the handset display whenever you have messages waiting in yourvoice mailbox. When you subscribe to the service, your voice mail provider provides you with the access number and the required voice mail signaling tone. You can use your phonebook to store the access number.

Resetting the Voice Message Waiting Indicator

When you receive a new voice mail message, the new message LED on the top of the handset ?ashes and
appears in the handset display. In the event your message alert tone gets out of sync with your phone company's voice messaging system, you can reset back to its original "no messages waiting" state. To reset, press and hold [?nd hs] on the base for ?ve seconds. A beep sounds and the message alert tone is reset.

Here is the manual:
Uniden 6035 1 Owner Manual

try to hard reset it then try again the code is
try to reset the phone to factory settings;
Factory settings reset. Type *#7780# and the phone's lock code (Nokia default lock code is 12345). This reset restores phone's original settings.

The Fatal error "errcode 0x000f" is displayed on the handset and has detected a fault from which it cannot recover. This is internal problem within the handset. You'll need to return handset to Polycom.

sir go to the settings >time and date >turns on the auto time zone.in this mode whether you want the clock to be automatically updated when you enter a new time zone............

Try swapping the handset and cord with a working phone. Those handsets are known to loose the transmitters. As for the ringing, have someone make an intercom call to your extenxsion. Do not answer the call...while the light is flashing press the volume up button several times. www.dyna-tech.us
Hope this helps

I was wondering if you had installed the external ring sensor, this sensor most be over the telephones speaker, if the speaker isn't under the handset. hope this can help.

Reason: Previous authentication no longer valid

This suggetss it has the wrong password or the wrong authenticaiton type (WEP vs WPA, for example)

Our company is in the business of setting up equipment and providing advice over the phone. We have hundreds of calls a day, now we use a small VOIP system. But the number of calls is already overwhelming the available pool. We need to look for an alternative.

that is done through CS 1000E switch.
YOU WANT COMMANDS PLS LET ME KNOW.

here you are...
This could be the problem with your signaling server , have you checked it ??
I think it is losing connectivity of T-Lan Network.