Caller Id I have a Nokia n70 and want to block my number going out when I sms. It comes up private number when I call but shows the number when I sms. Any Ideas.

A. Open the phone app, and tap more>call settings>call rejection
1. Next tap auto reject list
2. Now, toggle the Unknown Option On
3. N.B. If your Android smart phone does not include an
option to block unknown numbers, you can also download and install Call Blocking Apps, such as Extreme Call Blocker or SMS and Call Blocker

You would have to subscribe to that feature from your local phone company, then when a number like that calls they will get a recording that states you do not accept blocked calls...

1. Just dial *67 before the phone number on your cell phone. This code is the universal command to deactivate caller ID.
   
   For example, placing a blocked call would look like*67 555 555 5555 (without the spaces). On the receiving end, caller ID will usually display "private number" because it has been blocked.
   
   Though you won't hear or see a confirmation of a successful caller ID block, it will work.

Telephone settings
Select Menu > Tools > Settings > Phone.
Select from the following:
• Call — Define general call settings.

Call settings
To display your phone number to the person you are
calling, select Call > Send my caller ID > Yes. To let
the network determine whether your caller ID is sent,
select Set by network.

Hi

Thanks for using FixYa. I think you have stored more than 100 Caller ID messages and hence the caller ID is not showing on Uniden Tru8888. In the following cases the caller ID will not be shown-

If you answer a call before the Caller ID message is received (for example, before the second ring), the Caller ID message will not appear.

When the call is received via a telephone company that does not offer Caller ID service, the caller’s phone number and name does not appear. (This includes some international calls.)

When the call is via a private branch exchange (PBX), the caller's phone number and name may not appear.

You may receive any one of the following messages:

When a private name is received; Private Name
When a private number is received; Private Number
When a unknown name is received; Unknown Name
When a unknown number is received; Unknown Number
When invalid data is received; Incomplete Data

The Caller ID list stores information for incoming calls - even unanswered calls. You can store up to 100 Caller ID messages and phonebook entries (including Speed Dials) for each handset and the base. You can view the Caller ID list through the handset or base during a call or when the phone is in standby mode.

Memory locations for Caller ID messages and Phonebook entries (including Speed Dials) are common, you can store up to all 100 entries for each handset and the base. Caller ID messages are not stored when you have 100 phonebook entries. When you have stored a total of 100 phonebook entries and Caller ID messages, the oldest Caller ID message is overwritten.

Please do rate the solution and revert for further assistance.


Thanks
Rylee

I can help you with that, if you dial *67 and then the phone number, for example ( *67-715-392-0123 ) it should block your phone number from comeing up on caller id...........Hope this helps........

they shouldnt. go thru your settings and change it to a mode where private calls are not coming in as proivate.

then reset the phone, either master reset or just take battery out n put back in again ok.,

• If you answer the call, the number (or number and name) stays on the display until either you or the caller hangs up.
• If you do not answer the call, most display units keep a record of the calls received, including the phone number (or number and name), date, and time.
• If the letter P, priv, private, or a similar term appears, the caller may have blocked the display of his or her number.
• If the letter O, ????, out of area, or a similar message appears, the caller either is in an area that does not support Caller ID or has placed the call using operator assistance.
• Caller ID comes with Anonymous Call Rejection, which, when active, allows you to reject calls from callers who block their number. Your phone does not ring, and the caller hears a message saying blocked calls will not go through.
• To turn on Anonymous Call Rejection, press
  *77 on a touch-tone phone (or dial 1177 on a rotary phone)

• To turn off this service, press
  *87 on a touch-tone phone (or dial 1187 on a rotary phone)

or go through
http://www.decommunications.com/support/topics/repairs/phone/no-id-name.php

Go to Setting-Network-Operator Selection. Keep it Automatic
Go to Setting-Call-Send my caller ID. Keep it Set by network
& check your line in use. Keep it in Line 1

The caller has caller ID block placed on their acct/ this can interfere with sending sms messages to a phone that does not accept sms or voice calls from a line with caller id block/ I had cust resprond to a text with send new to area code plus 10 digit number/ success/ removed caller id block from service and had cust click *star 67 then area code plus 10 digit number/ if you choose to have your contacts entered with *82 area code plus 10 digit cell number you will get error 00107/ can not receive or respont to blocked calls particularly long distance/resolves iss/ I am a technical suport agent for sprint/ Happy Texting