Pro-84 Nascar Scanner Manual?

Sorry, but the NASCAR label on these scanners is little more than a scam. There are no special features that make race scanning easier or organized -- they just cover the frequency range that cars and pit crews operate on.

Bill B.
Listening in professionally since the 60's

The PRO-95 is a pretty good trunking scanner, but it's far from ideal for NASCAR monitoring. You can use it for that purpose, and the best way would be to clear all of the programmed information by initializing the scanner. Instructions for this process are on pace 83 of the factory manual, and the best programming instructions are also in the manual. If you don't already have it, you can download and print the manual, at no cost, here:
http://scancat.com/OnLineHelp/OEM_Radio_Owners_Manuals/RadioShack-OlderManuals/Pro-95/pro95.pdf

You can find a comprehensive database of active frequencies in your area, or at the race track, and a lot of other useful scanning information, by visiting:
www.RadioReference.com.

BTW, the best scanners for following the NASCAR action are the Uniden BC72XLT, BC80XLT, and the BC92XLT. All are simple to operate and moderately priced. You can also pick them up used on many web sites, including eBay.

Bill B.
Listening in since the 60's

You can download and print your manual, at no cost, here:
http://rsk.imageg.net/graphics/uc/rsk/Support/ProductManuals/2000516_PM_EN.pdf

Bill B.
Listening in since the 60's

The NOAA weather frequencies have constant broadcasts, so your scanner "locks" onto them. The only ways to prevent this are to either delete the weather frequency or lock it out. To delete, just program the frequency "0.0" (zero point zero) into the channel. To lock it out, press the L/O key while on the weather freq.

Bill B

To RESET the PRO-84, turn the scanner OFF, then hold in the 2, 9 and HOLD keys and power the scanner ON. The word CLEAr will appear on the display to confirm the RESET.
While the manual for the PRO-84 has not been posted by Radio Shack, it is essentially a red PRO-83. You can download/print the 83 manual here:

http://scancat.com/OnLineHelp/OEM_Radio_Owners_Manuals/RadioShack-OlderManuals/Pro-83/pro83.pdf

For a comprehensive database of active frequencies in your area, visit:

www.RadioReference.com

Bill B

Press HOLD,then enter the channel number where you want to store the frequency, then press FUNC + PGM, then the channel number appears, use the number keys and ./CLR to enter the frequency you want to store including the decimal, press E to store the frequency.....You can get your frequency's at www.Radioreference.com ...hope this was helpful...

It was hard to find, but you can download your manual here:
http://www.cyberdyne.org/~icebrkr/files/RadioShackPRO84-Scanner.pdf

Hi, Always happy to help a fellow NASACR fan! Try this link for frequencies.

scannerbytes.com/2009-sprint-cup-scanner-frequencies/

Here is the lin to the manual download... CLICK HERE

Radio Shack has a manual for the PRO-83 scanner online in Pdf format. It worked great for me and I honsetly could not tell any difference in the PRO-83 and my PRO-84 !! It worked great for me and I had my scanner set up and working very quickly!! Hope this helps you all as much as it did me.. the manual is for the PRO-83 200 Channel compact scanner w/signal stalker search and lighted keypad.
Hopes this helps you all !!


http://support.radioshack.com/manuals/ome20-501.pdf