At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Had the blinking green light. Pressed Device and Menu and got the error code. Blinking green light stopped and then I pushed power. The TV is working. What is error 1 2?
When I moved the TV down stairs maybe we jiggled something. It has had the blinking green light and has not worked for a year.When I moved the TV down stairs maybe we jiggled something. It has had the blinking green light and has not worked for a year.
You can't post conmments that contain an email address.
I found this list of codes Error Code Probable Cause 12 No error detected 22 Recovery from momentary Reset 32 Lamp Cover open 33 Air Filter Cover open 34 Lamp abnormality 35 Chassis Fan failure 36 Exhaust (Back Cover) or Lamp Ballast Fan failure 37 Engine (DMD or Lamp) Fan failure 38 Excess Lamp Temperature 39 Excess DMD Temperature 41 Short Detected 44 DVI Cable (between Chassis and Engine) disconnected
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
1) Close the print head cover, and turn off the printer. While pressing the Resume/Cancel button, press the Power button. (Do not release the buttons. The LED lights in green to indicate that a function is selectable.)
2) While holding the Power button, release the Resume/Cancel button. (Do not release the Power button.)
3) While holding the Power button, press the Resume/Cancel button three times, and then release the Power and Resume/Cancel buttons. (Each time the Resume/Cancel button is pressed, the LED lights alternately in either orange or green, starting with orange.) During initialization, the LED blinks in green.
4) When the LED stops blinking and lights in green, press the Resume/Cancel button the 4 times. (Each time the Resume/Cancel button is pressed, the LED lights alternately in either orange or green, starting with orange.)
5) Press the Power button. The LED lights in green, and the selected function is performed. (When the operation completes, the printer returns to the menu selection mode automatically.)
You can check the Error code by doing the following.
On the Front panel hold down the Device and Menu Button for 5 seconds. The LED light will then start flashing the first set of flashing lights is for the "1"5 part of the code it will then pause for about a half second and start the ones place 1"5". The code will repeat 5 times before going off.
The Error Codes: 12 - Normal Operation; 21 - X-Ray Protect; 22 - Short Protect; 23 - Loss of Horizontal Deflection; 24 - Loss of Vertical Deflection.
The problem may also be in the power supply when you first plug the device in check how many times the Led blinks if it blinks for just over a minute the power supply is working fine. If the Led blinks repeatedly and does not stop the DM is not running.
This is a link to the service manual for you TV, http://www.service-manual.eu/model.php?id=2710
12 means no error. The device and menu buttons have to be pushed after unplugging and re-plugging for the error code operational check to work. If you have done that and if its still the same, then please tell me which LED is blinking so that I can help you. I remember your tv has 3 LEDs at the front.
1) Close the print head cover, and
turn off the printer. While pressing the Resume/Cancel button, press
the Power button. (Do not release the buttons. The LED lights in green
to indicate that a function is selectable.)
2) While holding the Power button, release the Resume/Cancel button. (Do not release the Power button.)
3)
While holding the Power button, press the Resume/Cancel button three
times, and then release the Power and Resume/Cancel buttons. (Each time
the Resume/Cancel button is pressed, the LED lights alternately in
either orange or green, starting with orange.) During initialization,
the LED blinks in green.
4) When the LED stops blinking and
lights in green, press the Resume/Cancel button the 4 times. (Each time
the Resume/Cancel button is pressed, the LED lights alternately in
either orange or green, starting with orange.)
5) Press the
Power button. The LED lights in green, and the selected function is
performed. (When the operation completes, the printer returns to the
menu selection mode automatically.)
6) Power off then back on and test.
If it still comes up with this error there might be some paper down near the print heads. If there is no paper there, you might have an actual hardware issue.
Did you try unpluge from the wall, and repluging back after 10 min.
Also run the self diagnosis by pushing the menu and device buttons on the front and let me know the code?
1) Close the print head cover, and
turn off the printer. While pressing the Resume/Cancel button, press
the Power button. (Do not release the buttons. The LED lights in green
to indicate that a function is selectable.)
2) While holding the Power button, release the Resume/Cancel button. (Do not release the Power button.)
3)
While holding the Power button, press the Resume/Cancel button three
times, and then release the Power and Resume/Cancel buttons. (Each time
the Resume/Cancel button is pressed, the LED lights alternately in
either orange or green, starting with orange.) During initialization,
the LED blinks in green.
4) When the LED stops blinking and
lights in green, press the Resume/Cancel button the 4 times. (Each time
the Resume/Cancel button is pressed, the LED lights alternately in
either orange or green, starting with orange.)
5) Press the
Power button. The LED lights in green, and the selected function is
performed. (When the operation completes, the printer returns to the
menu selection mode automatically.)
1) Close the print head cover, and
turn off the printer. While pressing the Resume/Cancel button, press
the Power button. (Do not release the buttons. The LED lights in green
to indicate that a function is selectable.)
2) While holding the Power button, release the Resume/Cancel button. (Do not release the Power button.)
3)
While holding the Power button, press the Resume/Cancel button three
times, and then release the Power and Resume/Cancel buttons. (Each time
the Resume/Cancel button is pressed, the LED lights alternately in
either orange or green, starting with orange.) During initialization,
the LED blinks in green.
4) When the LED stops blinking and
lights in green, press the Resume/Cancel button the 4 times. (Each time
the Resume/Cancel button is pressed, the LED lights alternately in
either orange or green, starting with orange.)
5) Press the
Power button. The LED lights in green, and the selected function is
performed. (When the operation completes, the printer returns to the
menu selection mode automatically.)
if it does it again i would check for bad caps Blinking Problem http://www.chrisandnat.com/Projects/BlinkingTV/blink.htm http://www.jeremyburns.com/Mitsubishi-Green-Blinking-Light-Fix.pdf http://www.fixya.com/howto/h159332-mitsubishi_dm_board_repair http://hdtvoice.com/voice/showthread.php?t=32186 replace DM Picture of bad caps http://www.auctioncreations.com/wd62525a.JPG
Mitsubishi TV troubleshooting Here's something that might also be useful. After you turn on the set, and get the regular red blinky lights, hold down the Device and Menu buttons together for about 5 seconds.
The Power light will start to flash in a two digit sequence.
For example, 3 flashes, then 7 flashes = 37.
Here are the error codes, and the corresponding problem:
12 = No error detected, check power supply.
32 = Lamp Cover is open.
33 = Air filter cover is open.
34 = Lamp abnormality
36 = Light Engine (DMD or Lamp Fan stopped)
37 = Exhaust or Lamp Ballast Fan stopped
38 = Lamp Temperature High
39 = DMD Temperature High
41 = Short is detected
44 = DVI cable between FMT and Engine disconnected
Here's something that might also be useful. After you turn on the
set, and get the regular red blinky lights, hold down the Device and
Menu buttons together for about 5 seconds.
The Power light will start to flash in a two digit sequence. please post your error code
When I moved the TV down stairs maybe we jiggled something. It has had the blinking green light and has not worked for a year.
×