How to fix THE TIME??

It is a virtually unknown make. The link might work better where you live.

https://www.google.com/search?q=change+tide+times+on+my+Kokoda+Time+Zone+Watch

..

The instructions say it can take a while depending on where you live..

https://www.google.com/search?q=On+Time+Talking+Atomic+Watch

..

Hello,

Information on the Garmin Forerunner 405CX can be found in the manual Download.
What sort of help did you need?

To order the watch strap K2152 please order on-line, for example: from Babla's Jewelery/Repair Center in United Kingdom (www.bablas.co.uk), or from Time Revolution (www.timerevolution.com) in Mississauga, Canada, or your local watches & jewelery store.
dthnnn91

It sounds like the time zone may be incorrect; check your manual to see if this can be the case. Also, these devices may wait until some time between midnight and 3 AM to synchronize with the 'atomic' standard. Make sure you have the watch near a window as this may aid reception depending on where you live.

The "mode" button is there to change the function of the + & - buttons.

If you press the mode button several times you will cycle through the various setting features of the clock.

Look for the one that sets the time zone and use the + or - buttons to select your zone.

Some experimentation may be required!

If you look at the GMT differential in the manual, you'll notice that it corresponds to the offset from GMT that your time zone resides in. I live in San Antonio but i don't see that on the list. I do know that when we're not in Daylight savings time, I'm -6.0 from GMT... so that's what i set it for. Also, if you're near enough to the coast to use this feature, it would probably be a good idea to compare the watch reading to the actual tides and adjust accordingly.

Hope this helps.

This watch automatically sets itself. I you live in the eastern time zone, you just have to wait for the watch to receive the signal then it will set itself to the correct time & date. The signal is strongest at night between the hours of 10:00 pm & 2:00 am so it normally takes over night to set. Sometimes the weather interferes with the signal so I tell people to give them a couple of days to pick up. Also if you are having trouble receiving the signal try placing the watch by a window. If you do not live in the eastern time zone try these instructions:

Hold down the button for 2 seconds until the time zone abbreviation & zone flash the keep pressing the button until your correct time zone is displayed. Then wait about 8 seconds for the watch to return to normal display. Then you just have to wait until it picks up the signal & sets itself. I hope this helps.