Tutorial HOW TO FLASH a Samsung SGH - J700

Not sure if there are any more firmware upgrades for this model, but you can check on the D-Link website. Connect to your router using the browser interface and see what firmware is already installed. Then under the support section on the D-Link website look for firmware updates form your model. If there is, then Download to a known location on you computer (usually comes as a ZIP file). Unzip the file and using your browser connected to the router, upload the update.

Which operating system ?

If windows 7 click start richt click on computer select properties then device manager scroll to your disk (hard drive) expand right click select update drive software

Every Seagate drive requires a few firmware updates during its lifetime.

Seagate firmware must be up-to-date to ensure that the product will run reliably.

Changing the firmware on a Seagate product to a more updated version will improve the product's performance.

Check the Seagate website often for any update available for your drive.

The firmware can be changed with just a few clicks of your mouse on the Seagate Web page.

Click the "Start" button on the bottom-left corner of the screen.

In the window that pops up, click " My computer " or just "Computer."

Another window will show up with an icon for your hard drive.

Right-click the hard drive icon and press the "Properties" option.

This will tell you what model your hard drive is.

For example, your hard drive might be ST31500341AS.

Open your Web browser. Type in www.seagate.com and press "Enter" on the keyboard.

Wait for the webpage to load.

Enter the word "Firmware" and your model number in the search box on the upper right hand corner of the webpage and press "Enter" on the keyboard.

Using the example from Step 1, type in "Firmware ST31500341AS".

Click on the first link that is returned in the search results.

Locate the firmware update. Double-click the update.

Press the "Download Firmware Update Utility" link to start downloading.

Click yes on any pop-up boxes that you may see.

Open the new firmware file by double clicking the file that you downloaded in Complete the installation by accepting all of the default questions that are asked during the installation process.

Hope this helps

Support site of RCA:
http://support.rcaaudiovideo.com/

Go to this support site for Opal, your model: M4008

The firmware is on voxxsupport file named FWUtility_1.2.4.exe download location: Opal firmware

For video converting use next link:
RCA video converter download

From http://www.belkin.com/support/, type the Belkin part number “F5D7231-4” in the “Search” field. Click “Search”

From the results page, click “F5D7231-4”.

Scroll down to the Software & Updates section. Click on "F5D7231-4 Firmware Update".

Locate the firmware that corresponds to you routers version number. To download the new version of firmware, click the download logo.

A window will open that allows you to select the location where you want to save the firmware file. Select a location. You can name the file anything you want, or use the default name. Be sure to save the file in a place where you can locate it later.

Note: We suggest saving this to your desktop to make it easy to locate the file. When you have selected the location, click “Save”.
The download of the firmware is complete. To update the firmware,
follow the next steps in “Updating the Router’s Firmware”.

Make sure that you have the router Wired to your computer before you continue with the firmware update instructions.

To resolve this problem, you will need to upgrade your router's firmware. Click ftp://ftp.linksys.com/pub/network/befw11s4_v4_v1.50.14_code.bin and download the file to your Desktop or My Documents folder (the link is to v1.50.14 firmware code). Once the BIN file has been downloaded, follow these instructions to upgrade the router's firmware: NOTE: Before upgrading your router's firmware, please make sure that the procedure is being performed by a computer that is connected directly to the Router with an Ethernet cable and not a wirelessly connected computer. Accessing the Router's Setup Page 1. Open a web browser such as Internet Explorer or Netscape. 2. When the browser window opens, go to the Address bar and type in the router's IP Address and click on the Go button (192.168.1.1 is the default IP address of Linksys Routers). 3. A window will appear prompting for a ?User Name? and a ?Password?. Leave the ?User Name? field blank, and type in the router's password and click on the OK button to login (admin is the default password). 4. The router's web-based ?Setup? utility should then load. Upgrading the Router From the router?s ?Setup? page, locate the Linksys logo in the upper left-hand corner of the page. Follow the instructions below depending on which logo matches your specific screen: If the logo matches the image above ("Linksys - A Division of Cisco Systems, Inc."), follow these steps. If not, skip to the next logo version. 1. Click on the Administration tab. 2. When the ?Administration? page loads, click on the Firmware Upgrade sub-tab. 3. When the ?Upgrade Firmware? page loads, click on the Browse button, and browse to the location where the firmware file was downloaded (and possibly extracted) to. 4. After browsing to the correct location, select the firmware file and click on the OK button. 5. Click on the Upgrade button to upgrade the router's firmware. If the logo matches the image above ("Linksys"), follow these steps: 1. Click on the Help tab. 2. When the "Help" page loads, click on the Upgrade Firmware link. 3. When the ?Upgrade Firmware? page loads, click on the Browse button, and browse to the location where the firmware file was downloaded (and possibly extracted) to. 4. After browsing to the correct location, select the firmware file and click on the OK button. 5. Click on the Upgrade button to upgrade the router's firmware. After completing the steps above, the router's firmware should be upgraded successfully.