I have a bluetooth button on my laptop but my bluetooth dont work?. when i press the button it says "no device" what shall i do ?

You can find the Control Panel by clicking on the "Start" menu and selecting "Control Panel."

Click on the icon that reads "Hardware and Sound." Then, select the tab that reads "Bluetooth Devices."

Click on the "Add" button. This will put your computer in "Search Mode."

This means that it will search for any compatible Bluetooth devices in the area.

Put your Bluetooth device in "Discovery Mode."

This can be done by pressing and holding the button on the side of the device.

This will cause the device to send out a signal that will be received by the laptop computer.

Select your device from the list of found devices on your laptop.

Once this is done, your laptop and Bluetooth device will be permanently connected as long as they are both turned on.

hope this helps

First of all you need to connect bluetooth device to the laptop because most Acer laptops don't usually come with bluetooth device but they have the software/driver that will make bluetooth to work on it. So, I will advice that you get an external bluetooth device connect it to your laptop, the bluetooth application will make the bluetooth device to work. Thanks

Most Acer product does not have in-built bluetooth. what they have is the application supporting bluetooth device. The best you can do is to get any external bluetooth device and install it driver as well on your Acer laptop, this will surely work.

Hi,
this problem is due to the improper driver for bluetooth module in your laptop . pls install proper driver and software .your problem will be solved .
thanks

Click start>control panel> system> hardware tab> device manager. Check to see if under networking is your bluetooth adapter installed correctly. If you dont see anything labled bluetooth that means you dont have a bluetooth adapter installed. If theres a yellow mark next to the bluetooth adapter, that means you'd need to reinstall the drivers to get it working properly

FIRST OF ALL RESTART YOUR MOBILE PHONE. THEN TURN ON YOUR BLUETOOTH CONNECTION ON YOUR PHONE. ALSO SET YOUR PHONE VISIBILITY ON FROM YOUR MOBILE BLUETOOTH MENU.

THEN TURN OFF YOUR BLUETOOTH DEVICE. NOW PRESS AND HOLD THE POWER BUTTON ON YOUR BLUETOOTH DEVICE. WHEN THE LIGHT BLINKS YOUR BLUETOOTH DEVICE IS DISCOVERABLE FOR YOUR PHONE.

NOW SEARCH FOR A BLUETOOTH DEVICE FROM YOUR MOBILE'S BLUETOOTH MENU. YOUR DEVICE WILL BE DISCOVERED BY YOUR MOBILE. NOW ADD THE BLUDTOOTH DEVICE TO YOUR MOBILE THE PASSCODE SHALL BE 0000 OR 1111.

NOW YOU CAN USE YOUR BLUETOOTH. IF STILL UNBALE TO EXCESS PLS. ASK US.

PLS. RATE MY SOLUTION.
NICE DAY
REGARDS

KETAN PATEL.

i dont think it has a built in bluetooth module.you may have to put an external one,like a blutooth dongle.

my computer is every problem that is soung problem.eg widow media is not normal working always

The webcam is integrated, i called that 'on-board'.
Meanwhile HP support have provided a perfect solution by suggesting that the Quickplay application be removed from the windows startup sequence. The webcam is no longer locked and can be addressed at will.
Excellent. Thanx

I Also have the Aspire 5310 and when you press the bluetooth launch button it says 'No Bluetooth Device', this is becasuse it does not have the Bluetooth card installed into this computer and this is an extra for your laptop... hope this helped.
Thanks