How do I reset my Frigidaire Affinity Front Load Washing Machine? When I press a button the ERR code comes on and then it turns off.

Question edited for clarity.
Question moved to Affinity.

Try a full system reset. If that doesn't work, you need a service call.

Resetting the Frigidaire Affinity washer

• Unplug the power source or turn the circuit breaker off for a few seconds.
• Then plug the power back on to reset the washer to default settings.
• Now press the cancel button to cancel all commands.
• And in the next step press and hold the spin speed and soil level buttons together for four to eight seconds.
• Hold the buttons until you hear some signal sounds and then leave the buttons.
• After that open the door for more than 2 times and make sure it gets closed again each time. After this, your machine has been properly restored to proper default settings. This will lead your machine to work properly again.

..

E47, no spin.
Replace the door lock.
To learn more about your washing machine, or to order parts, click here.
Related Posts:

• How to Replace the Door Switch on a Whirlpool Duet or Kenmore HE3t (and HE4t) Front Loading Washing Machine
• ddo Error Code on a Frigidaire Front Loading Washer
• Frigidaire Affinity Front Loading Washer Error Codes
• Whirlpool Duet Washer Door Latch Stuck in Lock Position; Washer Repair
• Replacing the Door Latch Assembly in a Kenmore / Frigidaire Front Loading Washing Machine

I have had that problem before...Try unplugging it and plugging it back in...sometimes it's almost like dealing with a computer.

Press & hold down the 'options' & 'select' buttons for over 3 seconds. And let me know. These are the buttons, but how long?

my name is joyce

first try the simple step, unplug unit for 60 secounds, then replug unit back up. reset load and see if that works. let me know if I can be of further assistance.

joyce

Dear Abhkss
ngfam at you service,
Sounds like you need service for electronic parts!
Call A&E Factory Service /They service nation wide
And are available 24/7 for making appointments!

If the appliance is 10 years old or more,it may make sense not to invest any money to fix it!
Happy to assist you,
Neil

PS.Before you sign off!
PLEASE GIVE ME A GOOD RATING HERE ON FIXYA.COM

un plug the washer for 5 minutes and re try

that was just happening a few seconds ago with mine and i just tried pusing the control button and the options button at the same time for a few seconds... i reopened the door and pressed start again...it's running now... good luck

Ok the washer is telling you we have a problem. I will tell you how to retrieve the code and then ill tell you what that code means
1. Wake the washer by pressing any button.
2. Wait 5 seconds.
3. Press and HOLD the Start/Pause and Cancel
buttons simultaneously. As long as the buttons are
held, the failure code will appear in the display as an
E followed by two numbers, a number and a letter or
two letters. The controlwill beep and the Door Lock,
Wash, Rinse, and Final Spin indicator lights will
flash.

Press "stop" & "cancel" together for over 10 seconds to clear the display; and continue your..........

And rate me pl.......