F30 Open probe connection.
Check
resistance at room temperature & compare to RTD Sensor resistance chart. If resistance does not match the RTD chart
replace RTD Sensor Probe. Check Sensor wiring harness between EOC &
Sensor Probe connector.
Check
resistance at room temperature, if less than 500 ohms, replace RTD Sensor Probe. Check for shorted Sensor Probe harness between EOC &
Probe connector.
You can find
links to helpful exploded view diagrams and part ordering help
here.
I'd recommend that your bookmark this link to your favorites.
To find your nearest servicer, see Frigidaire Customer Support.
We're
happy to help you with free advice and we'd appreciate your thoughtful
rating of our answer.
Thank you for your inquiry, friend!
From the information you have provided your Frigidaire stove is not unlocking and you have shut it off at the breaker and pressed clear. You have performed the proper troubleshooting regarding your stove and it appears that you could have a possible problem with the door latch or control panel. I would recommend having a professional technician come out and complete a diagnosis and repair on your stove. I hope this information is helpful. -Matt
Hey JT Tai, I appreciate your post!
The symbol at the top left hand side of your display could be child lock symbol or vent symbol. If it is the child lock you should be able to press and hold the stop/cancel button down for 3 seconds to release the child lock.
If the light is on for the vent I would seek assistance from a professional for proper diagnosis and repair to be completed on your microwave. I hope this is helpful. -Matt
171 views
Usually answered in minutes!
×