I need to program my jumbo universal remote " THE SHARPER IMAGE" but can't find the instructions needed to use the proper code for a Sanyo TV. Help!
The "auto" mode isn't quite presented correctly in the documentation or posts I've seen...after MUCH trial and error (and about 3 hous) I've been able to set-up ANY infrared device, either by "auto" or learn. (Although maybe not "fully".)
AUTO Method
1. Press & Hold (about 3 sec.) the [DEVICE] button on the JUMBO Remote....llight will stay solid.
2. Now just press the [POWER] button (only) ONCE while pointing at the device...it will start sending codes approximately every second. (Don't keep pressing the power button as instructions indicate.)
3. TIMING IS EVERYTHING HERE. (It may take 5 minutes to find your devices code.)
4. AS SOON AS the power goes off...press the [ENTER] button on the JUNBO Remote.
5. Now pressing the [POWER] button should power up/down the device.
---- any buttons not programmed will have to be handled using the LEARN method ---
LEARN Method
1. Press & Hold (about 3 sec.) the [DEVICE] button on the JUMBO Remote....it'll stay solid.
2. Press the [LEARN] button on the JUMBO Remote. (light will immediately blink rapidly.)
3. Now Press the {NEEDED} button to program. (light will stay solid)
4. Now (1 to 2 inches away) have the ORIGINAL Remote pointed at the JUMBO Remote and press the {DESIRED} button on the ORIGINAL Remote.
5. It blinks rapidly while sending...then a slower steady blink once "LEARNED" correctly.
*** Not all buttons work properly with the "LEARN method". Some you will need to "associate" with an alternate button on the JUMBO Remote. ***
I sincerely hopes this helps anyone & everyone.
I have the sharper image jumbo universal remote control. i need to program my television. i can't find the instruction that is needed to use the proper code for a zenith TV. help!!!
Here is a direct link to the PDF of the Instruction Manual:
http://mscustomercare.com/forms/JumboRemoteEM_InstructionManual.pdf
Go here for "the sharper image jumbo touch remote" user manual: http://www.mscustomercare.com/forms/JumboTouchRemoteIM.pdf
Thank U! was very helpful!!!!
Thanks so much for the info, it was just what I needed.
×
I went to your website because it was advertised "FREE" and noticed I would have to pay instead, so I said to heck with it,,,,,I could buy another remote control a lot cheaper.
If you go to a website called www.mscustomercare.com. Scroll down to the bottom of the page click on The Sharper Image Universal Jumbo Remote then click download. The manual has the instructions and codes for your TV
Solution #5 by guest worked for me. Thanks guest!!
I have the instructions and still cannot get the Scientific Atlanta Explorer 2200 coded. It will not learn any codes from the cable remote either.
I need proper 3 digit code for a tv olevia can u help me?
Need code for a tv sanyo
- turn device on
- press and hold code search button until red light blinks
- press the device button you wish to program
- press the power button and release. Do this repeatedly (pausing 1 second in between) until device shuts off.
- press and hold enter button for 5 seconds.
Test device
worked liked a charm...GREAT!!!! thanks :)
Worked for me, thanks
Thank you I tried for hours and I done this and it worked immediately..:)
i dont have a code search ,learn or enter button on mine so what do i do then anyone
Hot hard buff cowboys with their balls throbbing haaard
×
Codes: 506,311,612,002,428,802,412,619
Hot hard buff cowboys with their balls hrobbing hard
TV owner manual
I need the code for a magnavox tv
Go to http://mscustomercare.com/ click on the image and download the manual
I have an amphibian media works (amw) dvd player. where can i locate remote control for it. Just purchased a jumbo universal remote,, but it does not have codes for the amw. can you assist me. Thanks, Tommy D.
I am having problems programing ny Jumbo remote to link to my
ORITRON DMS2152 is there anyone out there who has the code
for this brand?
P.S.- It is a DVD Micro System W/ Digital Tuner & I beleive where the remote would be read by the player says IR so I don't know if that is noemal or some type of Infra Red I need another special remotr for????
SOURCE: INSTRUCTIONS NEEDED FOR THE SHARPER IMAGE - JUMBO UNIVERSAL REMOTE
Hello kls1996... programming your remote is rather easy. The easiest way (thanks to The Sharper Image Jumbo Remote being a LEARNING SMART remote) is to do the following:
1 - Point the head of your Sharper Image remote at the head of your Sanyo TV remote (nose to nose so the clear bulbs on each remote are facing each other).
2 - Press the "TV" button on your Sharper Image remote (located in the upper left-hand corner).
3 - Hold the "LEARN" button on your Sharper Image remote (located in the left edge under the volume buttons) until the red light flashes.
4 - Press the key on your Sharper Image remote (e.g. Volume Up or +VOL)... the red light will go solid (indicating that it is waiting for a signal from the other (in your case Sanyo) remote.
5 - Press the key on your other remote (in your case the Sanyo remote) that you want programmed in your new Sharper Image remote... the red light will flash rapidly again.
6 - Repeat step #4 until you have programmed each key.
7 - When done... press the "LEARN" key on your Sharper Image remote. Your Sharper Image remote should be programmed to operate your device (in this case, your Sanyo TV).
NOTE: You can program other devices such as your VCR, DVD, VHS, SAT, CABLE, etc. and not just one device.
88,775 views
Usually answered in minutes!
My mother has the same jumbo remote from Innovage, The batteries died and lost the codes and she lost the manual. Need instructions for programing remote.
lost program instructions
need a manual.
Need tv codes for the sharper image jumbo remote controls
our tv is a sanyo
sharper image/jumbo remote need instructions. thanks
I need to know how to program the remote for a satelite for dishnetwork and a tv that is rca
LOST INSTRUCTIONS FOR THE JUMBO REMOTE and want a copy so I can use it
i need codes for the jvc tv brand
LOST INSTRUCTIONS FOR THE JUMBO REMOTE and want a copy so I can use it (Sharper Image Universal Jumbo Control)
Have magnavox tv dvd and vhs combo. Cant find the instructions for programing the remote. (sharper image jumbo universal) Thank You
No instructions. Help!
Need code # and instructions for Sylvania TV/VCR combo
I need a code for a Sanyo tv with the Sharper Image Universal Jumbo Remote.
I need a code for a Sanyo tv with the Sharper Image Universal Jumbo Remote.
I have a RCA TV and just purchased the Jumbo for my hubby for Father's Day and why is there no instruction manual with it?? I have no idea where
to start!
I need to program my Sharper Image Jumbo remote control. Can you tell how using the code search
I need to re-program my remote. I have changed the batteries and dont know the steps for re-programming from there. I do get a red blink now and then when I press any buttons. The buttons do not light up or control the TV at all.
lost the codes instructions and need to re-program the remote
I don't have the instruction on how to program this remote. . Does anyone know the steps to push. Help....
Can't find the instruction manual and just need the code for a magnavox TV
I need instructions (steps) and the codes to program the sharper image- jumbo universal remote for a Sony TV. Can you help.
do not know how to set it up there were no instructions.
i need to know the code for my sony tv and how to program it into the remote. I cannot find the instructions
I need the code for my sony tv and how to program it into the remote. I have the sharper image jumbo universal remote
need code for a ge tv
need code for sansui and I have the sharper jumbo universal remote
we need the code for the sony t.v.
There is not code for my dynex 20 inch tv/dvd
If possible can you email me the code.
INSTRUCTIONS NEEDED FOR THE SHARPER IMAGE - JUMBO UNIVERSAL REMOTE problem
Need instructions to program the Jumbo Sharper Image Universal Remote for a Sanyo tv.
i have need the code for a Mitsubishi tv, i lost my paper
i need 3 digit code for a tv olevia
I do not know how to set up my jumbo remote.
I too have a sharper image remote control and I am trying to program it to my polaroid tv/dvd combo
I have sharper image and I need to program it to sony tv how can I do it and what is the code for sony tv ?
I need to program my sharper image jumbo remote.
I need help in programming the remote for a Scientific Atlanta DVR box.
i dont know how to set my sharper image jumbo universal remote to my phillips tv so i can take of subtitles
I have a problem setting up my remote to my sony tv and my sony dvd player
does this dam remote work!
i need to progra my remote but cant find instructions
i have a 40" poloraid lcd tv but can not find the code. I have tryed the code search but have not been successful.
The 3 Digit Does work For Direct tV recoroder
I have the Sharper image jumbo remote and cannot find the 3 digit code for Scientific Atlantic Explorer 8300, been to both web sites and no help. Tried to get the remote to learn but it will not, any ideas?
I only have the quit start directions. I can't get it to learn. It does find the correct code though. I can't get the learn light to go solid.
I need the instructions on how to program>
Thanks
[email protected]
I just got a 42 " Polaroid LCD TV and can't find the code for it even using the instructions for searching a code.
I need the code for the sharper image jumbo sized universal tv remote, my t.v.is a sharp.
yyyy
my code for my rca tv was lost . i have a sharper image jumbo touch remote
need to program jumbo remote
i cant prgram this thing
I Have A Phillips TV and cannot get remote to program to it. No Papers for the remote.
i need the codes to change my tv
i cant find the instructions for my sharper image jumbo remote.
I lost the Instructions for my Sharper Image Jumbo Universal Remote.
How do I program it?
instructions needed
need code for sony tv
Need to find code for direct tv & RCA tv
Jumbo Remote Control TV code for a Sony Bravada TV.
i need codes for a dynex tv
i havea samsung tv help meee i need codes please
need code for sanyo tv and how to make the remote work
new tv and can't program without instructions. It is a Haier tv.
same as above but on a sony trinitron television. i need code for this
idk how to do this... i got it at a rummage sale and the wrapper wasn't their...
don't have instructions for remote
my tv is a magnavox need code&instructions please!
can't make it to work. i have dishnetwork and jvc tv
My tv brand is Dynex . Is there any tv codes and instructions that will work for this brand, have been troubleshooting for a while now,
Set up for Element tv
×