Quasar TV access code for parental control

How do I obtain a parent code for my child's leap pad ultra? My child started the ultra before I could set up anything.

If you don't know either the PIN or the secret question, the Parental Controls will need to be reset. Call 1-800-255-3700 for assistance.

This is what I found in the instruction manual on this and I posted it here for you. Try using 3355 for the code and everything else listed here. If that doesn't work, try the very last tip which tells you how to do a factory reset and repeat the first step using the 3355 as the code.

Here's the instructions from manual:

Parental Control
Parental Control allows you to block certain channels or programs so children cannot view
programs that are not age appropriate.
To enter the Parental Control menu, you need an
access code. The first time you enter, use access
code 3355. See "Setting an Access Code" on
page 33 for information on creating a new access
code.
You can set the following options to block
content:
• Channel Lock — Blocks selected channels
• Movie Rating — Blocks movies based on their rating (G, PG, PG-13, R, NC-17, and X)
• TV Ratings — Blocks TV shows based on their rating
• Block Options — Turns on or off all your parental control settings
NOTE: You can use Clear All to unblock the channels and programs that you have set.
NOTE: If the Block Control in the Parental Control menu is enabled, all the sub screens in POP (POP1,
POP3 and POP12) mode will be blank



Setting an Access Code m
After you enter the Parental Control menu for the first time, you can set your own four-digit access
code. If for any reason you lose or forget your access code, you can use the default code.
1 In the Parental Control menu, select Change Code.
2 Using the number pad on the remote control, enter a new access code.
3 Select Exit.




Reset the original factory defaults. Press Menu on the remote
control, select Setup, and then select Factory Reset

Are you referring to the Sky T.V. box ? If so, do the following.
How do I set up parental controls?
You can set up parental controls using your Sky remote control. If you want to turn the PIN restrictions on or off at any time, go to the Parental Control menu (press the services button to access this) and press the red button.


Hope this helps, ~Don

Do Research on the remote with the tv brand name in google. you will find something such as an manual.

I can help you unlock your Mitsubishi HDTV V-Chip parental lock.

Please follow these steps to bypass the vchip or reset the V Chip password.

I hope that helps.
_______________________________________________
Reset Mitsubishi HDTV VChip Password
Bypass Mitsubishi HDTV Front Panel Lock

Hold power and action at the same time for 10 seconds

I bought a Quantum Fx (REM-102) TV remote control for VIZIO TV but the remote control don't response

I did intent some codes to control programming but don

There you go:
1) Hit [MENU]. Press [CH up / down] to select ?V-CHIP SET UP?, then hit [VOL up].
2) Enter 4-digit access code with the Number buttons. If you have not set up your personal access code, enter 0000 (default access code).

When there is a parental code, you have to ring up your tv service provider for the code.