I have Fisher & Paykel SmartDrive 603 top loader washing machine (approx. 10 yrs old).
The problem I am facing is that during the fill cycle, the water in the machine is dripping in very slowly (not coming with any pressure) and therefore takes a long time (approx. an hour) to fill up. Hence the full cycle takes up to 2-3 hours to complete.
Try taking the cold hose of at the tap and check to see if has a little mesh filter in there. This could be blocked up with gunk.
The steel mesh filters can either be in the hose itself (some have them at both ends)
also
inside the water solenoid where the hose connects to the machine there is a little plastic filter that can only be removed with a pair of pliers
669 views
Usually answered in minutes!
×