How do you connect the NEC VT560 to project tv pictures

The projector is in standby mode, which is a good sign.
When you press the ON button for "at least 2 seconds or more", what happens.

Do any lights come on at all?

Hello.

Connecting the nec to your tv, I think you mean you would like to get the TV's picture out from the NEC instead of the TV.

You need to connect your digital cable box or dvd player or vcr system, where the picture goes to the tv, to the projector instead to get it to display the tv picture.

Can't guarantee that it would work without knowing more about your equipment.

If that is not what you wanted to do then I do not know.

just hold the exit button for 10 seconds and the orange status light will turn off.
Hope this helps..

if its always 1min. work b4 the picture offf ,check ur power filter capacitors & if only sound comes when power on change ur inverter

CK your Hori output Transistor if it is shorted high voltage will shut down

If you look into the Len's of each tube briefly when it is on and look at the quality of the picture. It sounds like the fluid is bad and should be replaced by a service company.

Any chance you might think that it is your remote control faulty? As you need it to turn your plasma on from standby via remote (only). Let me know.

replace the bulb

Hi,

Get the Wii "COMPONENT" cable set. This set has white-red (sound) connectors plus the red-green-blue (component - video) connectors. You can get this cable where they sell the Wii. It will give you the best possible picture with this device.

Plug the Red-Green-Blue connector in their respective sockets on the NEC display (upeer right-hand side). Switch the NEC display to the DTV/HD input (upper right button on the remote).

Please note that this setup does not provide sound since the display does not have speakers.
Use the white-red connectors and plug them into your amplifier or other sound device.

Good luck.

You will want to find a local servicer for an honest tech to come out and check for bad connections on boards. It will be hard to find someone for a 1972 unit and parts even harder. If you are near Cleveland, I can help
Craig www.classtorations.com