Help i need a wiring diagram for a pioneer avh-p5700dvd to connect to a wiring harness and a tr-7 output module

The recent pioneer DVD devices structures setup is achievable by inspecting the vehicles default wiring kits to determine the most compatible medium. The prior wires in the vehicle stereo appear mutated with attempt to extract and replace with new DVD stereo. Inspect the mutilated wires to determine the kit harness that allows connecting the new device on one end while binding to the electrical cables extended surfaces. The new stereo player makes possible connection of a multipurpose harness that solves the problems that may be thought to require bypass. Once the appropriate connection kit harnesses are acquire, the wiring should provide connectivity to speakers, tweeters, woofers and several devices as amplifiers also necessary predicted during installation else missing audio may be detected after. Refer to auto installations experts to acquire the complementary parts to attain the installations.

the blue wire is for hands free mobile connection, you do not need to wire this up unless you want hands free

here u can download user manual and install guide

http://www.retrevo.com/search/v2/jsp/mytrevo/myTrevo.jsp?page=man

If they are black or green then they are ground. The more ground the better. SO yes, both are ground. DO check fuse as well.

Operation and Installation Manual: http://akamaipix.crutchfield.com/Manuals/130/130AVHP400.PDF

bad output

MY PIONEER AVH-5700 TOUCH SCREEN DONT FUNSION

hope this helps,......http://www.nodevice.com/user_manual/pioneer/car_multimedia/avh-p5700dvd.html

You can do a search for part # CDE7790, you should find several dealers.

Here is one to get you started:

AVH-P5700 parts

Hope this helps.

You can find a wiring diagram for your 87 monte at http://www.modifiedlife.com/1987-chevrolet-monte-carlo-car-audio-wiring-schematic/ You can refer to the installation manual for your deck at http://akamaipix.crutchfield.com/Manuals/130/130AVHP570.PDF Since you are removing a shaft style radio and installing a DIN style you will need to perform extensive modifications to your dash. The Pioneer manual provides the dimensions.