IP adress configuration problem

Set and write the correct IP adress.

IPv6 is upgraded from IPv4 (Internet protocol).. Its implemented in 1994 this adres is stored in DNS, it is no way connection with the printer, when the printer is connected through lan net work, auto IP adress will assign by the DNS server depend up on the settings.. you can change the desire IP adress with the family range. If the printer is not showing IPv6 adress, system administrator can help you in this regards depens upon their permissions. Selected printer IP adress ahould be with in the family range and no IP conflict definately printer will work..

I dropped my Dell Insiron too. It seems to have had the same result as your's. I had to get a new motherboard (system board), before it would work again.

Hi Stephan,
the ip address of your router by default should be "192.168.1.1". to check if the ip adress of your router here's the solution :

1. go to control panel > network and sharing/networking >change adapter settings
2. then you'll see your local area connection
   
3. right click on it>properties
4. double click on (internet protocol tcp/ip) "tcp/ipv4 in windows vista/7
5. the select "obtain ip address automatically" & "obtain dns server automatically" click ok and click ok for the other window
   
6. double click on your local area connection > details
7. the dns server ip show should be your router ip adress
8. open your web explorer and type in your router ip an press "enter" you'll get your router configuration where you'll be able to change the default ip.

I hope that it will help & don't forget to rate

Kind regards

Most probably its the problem with the autonet ip address where the computer picks a bad ip address. If your internet service provider has DHCP enabled you cannot put the manual IP address. If its a new problem try system restore, uninstalling and reinstalling networkdrivers. resetting winsock.(search google)

hi,
cliakc on start button > run > type in without quotes "cmd" > ok(run) > click on the black window > type in without quotes "ipconfig"

this will show your ip address
Further Queries are welcome
If you find my solution helpfull please do rate me

If your laptop has a wireless card built in - or external, you will be able to get the wireless signal.  You need to open your wireless dialog - Start > My Network Places > View Network Places

We are using software called Brainware Columbus to do Remote OS Deployment, Software Deployment & Remote Support. We have had LANDesk installed on all our computers, and since we uninstalled LANDesk and installed McAfee 8.7i Enterprise, we have had some difficulties with some computers where they show they are connected to our Wired Lan, but their IP settings have dissappeared, the settings are blank. When you click on the repair option for the network, it gives an error straight away, and we have also tried Uninstalled & Reinstalling the NIC, that also doesnt solve the problem. Please help

Hi,

In your wireless router,U want to configure the ip adress of internet,may R u static ip R dynamic ip address,

1. Statis ip customer means, configure the static ip address in your wireless router,

2. Dynamic ip customer means, configure the ip address of the ADSl modem ip.

let you router allocate the ip addresses manually by enabling DHCP and restart the router,and remove the usb adapter from the usb port and reconnect it, but when you right click on the taskbar on the little pc icons for your connection click enable WZC windows wireless Zero configuration as this will dissable the software you got with the usb adapter and hopefully make the connection more stable, but ensure you have a strong signal.