My De Deitrich induction hob wont heat up.

Early ones could only support heating on no more than two rings because of the power draw.

Why Is the Induction Cooktop Shutting Off While Cooking?

https://primeappliancerepairs.com > blog > why-is-the-i...
Feb 12, 2021 - Does your induction cooktop keep on shutting off while in use? Here are some of the reasons why it's malfunctioning - and how to fix it.

https://www.google.com/search?q=Zanussi+induction+hob

...

An E6 error code on a Belling induction hob typically indicates an issue with the power supply or the circuit board that controls the back two rings. Here are a few steps you can take to troubleshoot the issue:

1. Reset the hob: Try turning off the power to the hob for a few minutes and then turning it back on. This can sometimes reset the circuit board and clear the error code.
2. Check the power supply: Make sure the hob is receiving a stable and adequate power supply. Check the circuit breaker or fuse for the hob to ensure it is not tripped or blown.
3. Check the wiring: Inspect the wiring and connections for the back two rings to ensure they are not loose or damaged. Tighten any loose connections or replace any damaged wiring.
4. Contact a professional: If the issue persists, it may be a problem with the circuit board or control module. In this case, it's best to contact a professional technician or the manufacturer for assistance with repairs or replacement parts.

I hope this helps you resolve the issue with your Belling induction

This happened to me today too. I heard an intermittent beep (I thought it was some kind of "hot" alarm). Then the 2 hobs on the right stopped working. Looking at my consumer unit, the fuses didn't trip so I'm not sure what might have happened

any guidance?

Check power supply at socket or meter box. Make sure that the circuit breaker hasn't tripped. Also, induction cooktops wont heat without induction cookware. They must be steel. Glass cookware wont work on an induction cooktop.

Induction stovetops wont heat until a metal pot is put on top of the element. They work through electromagnetism. These tops wont work with glass or aluminium pots. They have to be steel.

Some times the pots that you may be using are not designed for use in induction cooking. If you are, It might be the size of pot. The peeping sound might be the cook top looking for the pot. But when all else fails. Turn the stove off at the Breaker count to 12. Turn back on. Reboot. Hope one of these work.

I have a De Dietrich DTI749X induction cooktop and i have the FO error code flashing on two of the hobs.
How do I fix this?

Several posts regarding instruction manuals for De dietrich induction hobs. Goto "http://www.dedietrich.co.uk/hobs-induction-hobs-c-55_23_38.html" scroll to find your model - select it, then look for a link to download manual.

your induction hob reqs.,special induction pans to make them work correctly.