At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The "ink system failure" is caused by air in the ink nozzles. The clear the error you need to do a full purge of the system and the above procedure with do it.
HP just wants to sell another printer. The "ink system failure" error is caused by air in the ink feed tubes. This happens when the ink in the cartridges goes run all the way out or you use poor quality refilled cartridges. In both cases the printer tries to pump ink but gets air instead. We have a step by step guide to do a purge on the ink lines and reset the system posted on our web site at: www.ccl-la.com look in the printer repair pages and the HP. In less than 10 minutes you should be back printing again.
I hope this helps, if so please rate our solution.
Hello, The ink failure error is caused by air in the ink feed tubes in your printer. This happens when the ink in your cartridge runs out and the printer sucks up air instead of ink. We have a step by step repair solution for this error posted on our web site at: www.ccl-la.com click on the printer repair pages and follow the links to your printer series.
It's probably telling you it is out of ink. The ink system can fail if the cartridges in the product are installed
incorrectly, if the ink in the cartridge is low or out, or if the
cartridges are damaged or not correctly vented.
Here's the HP page that details the solutions for this problem:
×