Did not get setting instructions today at the base when I purchased my All sports stainless steel 40/8108 watch

How to Set the Time on an Arnette Digital Watch - eHow UK

https://www.ehow.co.uk > how_6246322_set-time-arne...
Press and hold the "Mode" button on your watch for three seconds until you see the flashing numbers. Use the top and bottom buttons on the left side of your ..

..

I would try removing the battery for 10 minutes reinstall the battery if it doesn't help there's a problem with the circuitry.
Hope it helps thank you.

you can check this watch on work shop.

There is another stop between time setting position and when the stem is fully pushed in. Try as long as you get it right.

If you haven't got instructions, you can get them from the Casio web site.

Go to the casio web site "casio.com".

Select "support" and the "manuals",
watches;

Accept terms

Select "watch manual archive"

Read the number of the back of your watch and enter it into the search box

This might help:
http://www.info.com/stainless%20steel%20bracelets?cb=27&cmp=4089&gclid=CLmY5aWk1aACFWV75QodumH8uQ

New pins can be purchased from amazon. Here: Amazon com fossil watch pins. I hope this was helpful. Cheers

1. it is easy all you have to do is hit mode


2.then you will se all zeros


3.hit mode again

4.then you will see a number blinking then press start/stop button and it will change to the next number


5.then just set it to your clock time and your done!!!!!!


hope this will help you

I also have this problem and how do you remove the links? it's too big for my hand.

i have a sinobi sports watch thats stainless steel, back water resistant model (2968g) and i just bought it, but the batteries died and i dont know how to replace them