E machine no power

hi Rpbarnhart.
this could be a few things wrong here.
the first thing i would get checked is the power supply.

Most likely either Motherboard or the CPU. Does this have a graphics card or built-in.
Standard procedure is to:
Clear the CMOS - chk manual for procedure.
Disconnect all cables from all drives and test.
Pull RAM and try with one module at a time in slot 1. Then try 1 in what might be slot 3, the 1st slot of second pair of slots.

Before giving up, I'd pull all the drive cables at once. Even carefully mark the front case wiring and pull everything but power switch if you can. You really want to remove all complications that might be an issue. Take it down to PSU, motherboard power, cpu fan and RAM.
Ok, there is Good news, and bad news. FIRST the bad news. You are not getting any power to the CPU. Fans and lights indicate motherboard power, BUT, power supplies ALSO provide power straight to the CPU, and if the CPU is not getting powered properly, it will not function.
or you could check these links out if the above does not work for you.



https://it.toolbox.com/question/my-emachines-model-t6216-does-not-boot-into-bios-061810

Build PC Emachine will not boot up
https://forums.techguy.org/threads/emachine-wont-start-up.1198007

In my opinion you have a faulty power supply, replacing only the fan may not solve your problem. Try replacing the power supply.

Could be a bad power supply or a dead cpu. I would start by changing power supplies with one that is working if you have a spare computer with an ATX power supply. It is nolt very common but could be as simple as a defective power switch. How does the switch feel when it is pushed? Does it spring back or feel like something is broken. Most of the time when I have repaired a PC that does absouloutley nothing when the power button is pressed....dead CPU. You could also try leaving the plug disconnected for 20 minutes....maybe something in the powers supply is heating up. They will store power even when the computer is off.

Ok, there is Good news, and bad news. FIRST the bad news. You are not getting any power to the CPU. Fans and lights indicate motherboard power, BUT, power supplies ALSO provide power straight to the CPU, and if the CPU is not getting powered properly, it will not function, and the result is what you see.
Now, the GOOD news is, Power supplies are relatively inexpensive (about 30-50 bucks) and MOST pc shops will install the power supply FREE (if you bring your tower to them, and purchase the power supply from them in their store, but call before going). If you want to save about 10 bucks, order the power supply yourself and install it yourself, but if you are not comfortable doing that, have a pro do it.

change your SMPS .it is faulty.

are u having any beeps at all if not unplug the power supply cord and look at the wires that go from the power supply to the mother board and plug the powercord back into the powersupply and try to start the pc if the powersupply still does not start the fusible link in the power supply probably has blown depending on what kind of power supply you have some of these fuses are replaceable as long as they are not soldered i just replaced the one for my dell saved about 130 bucks please keep me posted on this if you get anywhere ok best regards mike

try to change your RAM,if same also

try to change your graphic card if u use it...

happy trying..

good luck..

Check the ram and make sure is securly in it's place.. Unplug everything else from the mobo except power and fan/cpu and power button..

Do the fans come on?

very likely it is the power supply fan. I also had a noisy fan and replacing it was a solution. try to get the measurement for the screw mounting dimensions and the height (thickness) and also the driving voltage then search ebay's site. it can be cleaned and lubricated however...

Buy a dianostics card, and find out if its the RAM, CPU, OR Motherboard. (sounds like a ram or CPU problem though) if you have more than one stick of ram in the system, take one out, and power it up, if still not response, to the other stick out, and put the stick you took out the first time, and put it back in.