Cannot connec the Blueant V1 device to PC (tried 3

It will be invisible. You must put the device into "find me" mode (paring).

Check the security settings of your mac.

If the drivers are not found when searched through windows finder automatically, then unfortunately there is nothing that can be done. BlueAnt only officially guarantees compatibility on all cellphones which support bluetooth, when it comes down to computers it is hit and miss.

Rylan

I would test the device on another model of phone to see if the issue carries across, that will allow you to isolate the source of the issue at hand.

Rylan

try this site ... its the blueant homepage .. will have a solution there for you ....http://www.blueant.com.au/index.php

How to connect or pair a Blueant Bluetooth handfree.

1. Switch off the Blueant:
i.e. push the microphone inside the Blueant.

2a. Press and hold the GREEN telephone symbol (or Accept) pushbutton
On the Blueant flat face for 8 seconds. (this makes unit go into “pairing” mode)

2b. at the same time switch Power On to the Blueant by pushing out
the microphone on the side of the Blueant.

3.The Bluetooth Indicator will turn a blinking red/blue,
when you see this, release the Accept Button .
The Blueant is now in “pairing” mode.

4. Get you mobile in Bluetooth search mode to pair with a new device.


5. The Blueant will request your mobile device for a password.

6. Enter the password= 0000 , the devices now will be paired.

7. Set the Blueant as a trusted/authorized device, if this is option in your phone.

How to connect or pair a Blueant Bluetooth handfree.

1. Switch off the Blueant:
i.e. push the microphone inside the Blueant.

2a. Press and hold the GREEN telephone symbol (or Accept) pushbutton
On the Blueant flat face for 8 seconds. (this makes unit go into “pairing” mode)

2b. at the same time switch Power On to the Blueant by pushing out
the microphone on the side of the Blueant.

3.The Bluetooth Indicator will turn a blinking red/blue,
when you see this, release the Accept Button .
The Blueant is now in “pairing” mode.

4. Get you mobile in Bluetooth search mode to pair with a new device.

5. The Blueant will request your mobile device for a password.

6. Enter the password= 0000 , the devices now will be paired.

7. Set the Blueant as a trusted/authorized device, if this is option in your phone.
For more detailed information download the Blueant manual from the link below:
http://www.blueant.com.au/knowledge/manuals.php
I hope it helps.

Thank you for visiting FixYa!

I don't have a user guide available, but here are the instructions to use your Supertooth.

Pairing with Phone
1. Turn off all devices (ST Light and Phone)
2. Turn on Phone
3. Go to Bluetooth menu on the phone (might be in Settings > connectivity)
4. Go to device list or paired devices (make sure bluetooth is turned on)
5. Delete any old profiles that are still in there.

6. Go to the Supertooth Light (BlueAnt)
7. Hold down the green button (send button)
8. while holding it down, open the microphone
9. the light should start to flash "red" and "blue" (you can release the green button)
10. go back to your phone, and go into either 'device list' menu or 'paired devices' menu on your phone.
11. click on either search, add or new devices. Function depends on different phones
12. when the phone has found the device, it should say 'ST Light BA V1'
13. select it, then enter passkey "0000"
14. If your phone ask for authorization or auto connect, just click "yes"

By now, you should be connected to your device. Always remember to close the microphone before you leave the car.
Otherwise, it will slowly drain the battery. If you want to reconnect, just simply open the microphone.

Make sure you turn off your phone once every 2 weeks to reset the phone memory. This will help give a better
performance and clearer sound.

If you found this information helpful, please give me a big thumbs-up when you rate my answer. Thank you.

Go to this page, it will answer any question concerning the blueant .. including pairing to your phone .. activating your blueant etc http://www.blueant.com.au/index.phpalso gives you step by step instructions on codes, pairing etc

Go to this page, it will answer any question concerning the blueant .. including pairing to your phone .. activating your blueant etc http://www.blueant.com.au/index.php