Need english translation of zoom H4n handy recorder

Hello ! Actually what you do is download the latest firmware from the ZOOM page. Find HANDY H4 (you can Google that) and go to the Download tab. Follow all instructions. Be sure to have new batteries or be plugged in to AC while you reset. I've done it on my H4(I have 2) and H4n and it worked fine. Be patient, it takes a while once you start. Good luck !!

If your Zoom Handy Recorder H4n is stuck on the ZOOM window and you are unable to access the menu or use the recorder, there are a few things you can try to fix the issue:

1. Try restarting the recorder by turning it off and then back on again. This can often resolve software issues.
2. Check the battery level and make sure that the recorder has enough power to function properly. If the battery is low, charge it or replace it with a new one.
3. Try a hard reset by removing the batteries and/or the SD card, then press and hold the power button for 10 seconds before reinserting the batteries and/or SD card.
4. If the above steps do not work, try updating the firmware of the recorder. You can download the latest firmware from the Zoom website and follow the instructions for updating the firmware on your device.
5. If none of the above steps work, you may need to contact Zoom's customer support for further assistance. They may be able to provide additional troubleshooting steps or repair options.

It's important to note that if the recorder is still under warranty, you should contact Zoom for repair or replacement.

What I figured out - simple. Plug your usb cable all the way in. That's it. Did I guess it? ;)

The zoom H4 is out of production. You can get its successor the Zoom H4n here:
http://www.sweetwater.com/store/detail/H4N

It may not be a problem. See if you can perform a facrory reset and start again.

Check the amazon, here: Amazon com Zoom H4n mic take a look. Wish you best of luck.
Dan

If your H4n is in STAMINA mode (Switch in battery compartment) then MODE is not viewable in the MENU. Simply Turn off the STAMINA Switch and restart your H4n (Turn H4n OFF then ON again)

Hope that Helps

Cheers

Jaysan

You need to upgrade the H4  firmware from Zoom website
http://www.zoom.co.jp/english/download/software/h4.php

You will need an external SD card reader.
Good Luck

If you are using a Mac running Leopard (Sys 10.5), you need to upgrade the H4  firmware from Zoom website
http://www.zoom.co.jp/english/download/software/h4.php

You will need an external SD card reader.
Good Luck