I have this canon mx 320 printer with error 5200 please tell me how to repair it.

Canon Printer Error 5200 may occur if the ink level in your printer is low or if you have a defective ink cartridge. Follow the steps to fix Canon printer 5200 Error code:

·Refill your cartridges/Ink tank
·Clean printer cartridge
·Factory reset printer

Find here the more canon printer error codes and their solutions.

the printer was unable to detect the cartridge.

remove the two ink cartridges from the printer, both the black and color

clean the contact surface ( the surface where the terminals inside the printer touches) with a clothe moistened with alcohol.

after cleaning the contact, return the cartridges back to the printer.

see how it goes.

You need to replace the print head.If a have been useful give me a vote.

tengo canon mx320 y no imprime correctamente si es una linea recta sale torcida las letras tambien que puedo hacer

the printer cannot detect the cartridge. remove the cartridge and clean the surface with clothe moistened with alcohol. then return it back
restart the printer and do print jobs
If error appears press and hold stop reset button and wait for the printer to self restart before releasing the button.

I have problem in my printer canon pixma mx 330 it show error 5100, what should i do.....

there are two ways you can remove the error message from your printer..

the first is to reset the printer and the second is to replace the waste ink absorber. If the reset thing did not work for your then you'll be spending money to replace the absorber.

How to reset? follow these steps
1. Turn off your printer
2. Press and hold the STOP/RESET button
3. Press and hold Power ON button
4. While holding the Power ON button, release the STOP/RESET button
5. While holding still the Power ON button, press twice the STOP/RESET button
6. Release the Power ON button
7. Wait until it display an "idle" message. It will take about a minute.
8. When "idle" appear, open the top cover to expose the cartridges.
9. Lift up the cover for cartridge holder and take out both the black and color cartridges
10. Return the cover of cartridge holder and turn off the printer
11. Return the top cover and turn on the printer again
12. After the printer initialize, return the cartridges.

Hope that solve the waste ink absorber in your printer..

Error 5200 is a printhead temperature error, sounds like you need a new printhead. The part number is printed on the side of the printhead. it's a QY6 number

Sent the printer for repair to the local Canon Service Centre.