Conference calling from the Panasonic KX - TG2224? How to conference call

type in u tube How to make conference call in panasonic kx tg786 1e and the video will show you

Here's a link that has your manual which should give you specific instructions for conference calls.

http://www.retrevo.com/support/Panasonic-KX-TG2740S-Telephones-manual/id/1074ci771/t/2/

you can do as many conferences as you have phones, but one phone can have one conference at a time with 3 total parties(depending on your phone system) in the conference (so yourself and 2 other people, inside or outside of the office)

if you have a TDA/TDE/NCP phone system (blue box on the wall or in a computer rack) you can have 5 people in a single conference...

if you have a TD phone system (white box on the wall) you are limited to a 3 party conference

while talking to someone:

1) press "CONF"
2) dial the extension number (or 9+the phone number) you want to conference in
3) wait for the person to answer
4) press "CONF" again

While on a call, press conference or transfer button(will put first call on temporary hold). Make call to next party, talk to party, press conference button to join all callers. Same procedure to add more parties up to 8 total.

Also, if you use transfer button to start conference call you can use transfer button to join all parties.
If you use conference button to start conference call use conference button to join all parties.

You can download the manual here: http://safemanuals.com/user-guide-instructions-owner-manual/PANASONIC/KX-TDA200-_E

It says to press the function key to the left and then hit 6 and then type in the next phone number, hit the function key left and that should do it... But if that sounds confusing, you should review the manual by clicking the link above...

I believe you push the CO button, of the call you want to keep! (you have to remember which call is which!!

Depending on which system you are using (not the telephone) and how it is programmed, you may not be able to go beyond a 3 party conference. Some systems allow up to 8 parties. Just press Conf, attach to another call, and then press Conf again to go into the Conference. As they say, "Repeat as necessary."

We have a support package that allows us to make all the changes you need over the Internet for a flat annual fee. If you want your whole system to work properly and all changes to be made for you at a flat budget, call us at 877-236-8376.

What good is a website where people don't post the solution to their problems once they've figured it out?

You need to put the first party on hold before using the conference button. You can download the manual from the link below: http://www2.panasonic.com/webapp/wcs/stores/servlet/vProdSupportModel?displayTab=R&surfModel=KX-TS3282W&modelNo=KX-TS3282W&storeId=15001&catalogId=11017&itemId=64503&displayServiceCenter=true# Please update the question & let us know if the information given was useful to you - Good Luck!