How to transfer calls from 1 phone 2 the outher

With an android data transfer tool, you can transfer data fom one phone to computer, and import them to your another phone. Hope this helps you,
MobiKin Assistant for Android Windows Version

Panasonic KXDT321 Phone
Conference call Call party 1 and speak
Press transfer
Call party 2 (press 9 for outside line if needed)
Party 2 answers
Press transfer then 3 speak to all three people
Repeat if required

Panasonic KXDT321 Phone Conference Call
Call party 1 and speak
Press transfer
Call party 2 (press 9 for outside line if needed)
Party 2 answers
Press transfer then 3 speak to all three people
Repeat if required

Hello,

Go to settings on your phone, click on the phone option, it will display different option, select call forwarding or call divert, enter the number you forwarding the call to and press ok, you are done. follow the same procedure, when you get to call forwarding, you can select to cancel as you can no longer add a number.

Take care.

You have the ability to transfer an outside call to any extension within your phone system.
1. Press the [TRNSFR] button during your conversation
2. Dial the desired extension or press one of the Direct Station Select (DSS) buttons
3. One ring will be audible a transfer is successful. Otherwise, two rings will be heard
4. Any extension can pick call transfer
5. The Call Transfer mode will automatically cancel after 10 seconds if no transfer number is dialed

To transfer calls, while on call press Conf/Trn and dial extension number. To Call forward your call to another extension there are three codes depending on what type of forwarding #601 - #604. Your guides and manuals are here
http://guides.idacomusa.com/

To send a call to another telephone within your system, or to an external
telephone. You may not be able to transfer a call on an external line
to an external telephone, depending on the capabilities of the lines.
1. Make or answer a call.
2. Press the feature button then press 70.
3. Call the person you want to transfer the call to.
4. Stay on the line if you wish to speak to the person first.
5. Press the Release button to complete the transfer.
If an external call is transferred to a busy internal or network
extension, or is not answered after a few rings, the call automatically
rings you back.

Since you're asking this question in the Partner 18 category, I'm guessing it's a Partner phone.

1. Transfer from a system phone is done by pressing the TRANSFER button and either dialing the 2 digit extension or the DSS button programmed for that phone.

2. Transfer from a single line phone is by flashing the hookswitch (FLASH) button and dialing the 2 digit extension.

3. Transfer into voice mail is done by programming a button or pressing FEATURE 14 and the 2 digit extension.

Carl

External transfer to Mobile 1. Transfer 2. press 1 and external # 3. Wait for ringing 4. press feature then transfer 5. hang up

sounds like the phone transfer numbering is out of sync or someone thinks its funny to send there transfered calls
i would go with the lessor of 2
phone numbering extensions example=

say you want to call someone at 2430 ext. but it takes you to 2340 that would be phone interupt extention box

the phone company who installed the software should come out and make sure the extensions are to the correct offices its there service but you pay for quality service to know and see it works

to send back calls just transfer back to secretary switch board the secretary will know what to do