I need to purchase a window clip for a Uniden SWS

Yes, the plug and power requirements are the same.

Radio Shack has a kit with different connector sizes
make sure the polarity is correct ( hot is center) and youll be good to go

Download and print from http://www.uniden.com/pdf/LRD6399SWSom.pdf

X, K, Ka, Ku (sometimes displayed as X and Ka together) are the radar bands that police use.

L is laser

Other alerts can include:
-Emergency Vehical
-Railroad crossing or Train
-Radar Detector Detector (that's not a typo) - used by police to find radar detectors usually when they are illegal in that state.

Every radar detector is very different and one manual won't really help with all of them. If you give us your model and brand we might be able to help.

Uniden has been out of the radar detector business for some time now. I would strongly suggest getting a different radar detector instead of using this older model since newer radar detector models generally have far better performance -- especially for detecting Ka band radar.

Anyway, Uniden's web site does not list an instruction manual for this particular radar detector model. Yet, take a look at the instruction manual for the most similarly numbered product model shown in the following link:

Uniden Owners Manuals -- Radar Detectors

One of the instruction manuals in the above link should be similar enough to your radar detector so that you can figure out everything regarding your specific Uniden RD model.

CALL THEM AND TELL THEM IT BROKE AND 9 TIMES OUT OF 10 THEY WILL SEND YOU A FREE REPLACEMENT...

Don't use this radar detector. It is horribly outdated technology and will lead to a speeding ticket. I am not joking.

ORDER IT FROM THERE WEBSITE.....

LED Display gives you your display visual alerts, signal strength, and operation mode. Here is an attached link for the manual.....http://www.uniden.com/pdf/LRD6399SWSom.pdf
But to answer your question here is what the difference between the green light and the red light are:
1. X-Band Signal Indicator—A green LED lights and blinks to
indicate the presence of an X-band radar signal. The blink rate
increases as the radar source gets closer. A distinct audio alert is
also heard.
2. K-Band Indicator— An amber (orange) LED lights and blinks to
indicate the presence of a K-band radar. The blink rate increases as
the radar source gets closer. A distinct audio alert is also heard.
3. Ka-SuperWideband Signal Indicator— A yellow LED lights and
blinks to indicate the presence of a Ka-SuperWideband radar
signal. The blink rate increases as the radar source gets closer. A
distinct audio alert is also heard.
4. Laser Signal Indicator— A red LED under L lights and blinks to
indicate the presence of a laser signal. A distinct audio alert is also
heard.
5. SWS Signal Indicator— When an early warning hazard or
informational signal is detected, the yellow SWS LED begins to
blink and the amber K-band LED lights. A distinct audio alert is
also heard.
6. Power-On Indicator— A green LED under P lights to indicate
power is being supplied to the unit and the unit is turned on.
7. LED Signal Strength Meter—Four LEDs give an accurate visual
indication of the strength of radar or laser signals.
8. City Mode Indicator—A green LED under C lights to indicate
that you selected City Mode.
9. Auto Mute Indicator— A red LED under M lights to indicate that
you selected the Auto Mute feature.

Please make sure you give me a rating and I hope this helps,
cbinny1

bull shit