Question about Polycom SoundPoint IP 320 SIP IP Phone

2 Answers

What is the default password for Polycom Soundpoint IP 320 SIP?

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 95 Answers

Default Passwords:
To get into the web interface, the default username/password is "Polycom"/"456" (Note that this does not work with Safari 1.2.2.)
To get into the Admin interface on the hard phone, the password is "456". (Prior to v1.3.1, the web interfaces to the phone uses "Polycom"/"SpIp" as the username/password.)
The "user password" (not used much) defaults to "123".

To reset a lost admin password to default: at phone boot, during the 5 second countdown, push/hold 468* on the phone. Enter the phone's MAC address as the password. This will reset network info but keep peers loaded. Tested on Soundpoint IP 650.

Posted on Dec 22, 2009

Testimonial: "Thanx a lot. Although I had managed to find the password for console but the web interface password was still missing. :-)"

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 443 Answers

I thinks it's 000000 or 123456. But I suggest you to use LEO Privacy to protect the privacy and security of your smartphone.It is the best android app for free downlaod! You can unlock by password, pattern,cover or fingerprint easily. And so easy to operate, just tap to choose lock and unlock the apps you want LEO Privacy Applock Boost Hide Android Apps on Google Play

Posted on Nov 14, 2016

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

On Polycom 335 how do I reset voicemail for new employee


"If you need to remove the resource files from a phone at some later date-for example, you are giving the phone to a new user-instructions on how to put the phone into the factory default state can be found in 'Quick Tip 18298: Resetting and Rebooting SoundPoint IP, SoundStation IP, and Polycom VVX 1500 Phones' at http://support.polycom.com/global/documents/support/technical/products/voice/SoundPointIP_Resetting_Log_Files_QT18298.pdf "

http://supportdocs.polycom.com/PolycomService/support/global/documents/support/setup_maintenance/products/voice/spip_ssip_vvx_Admin_Guide_SIP_3_2_2_eng.pdf

Oct 06, 2014 | Polycom SoundPoint IP 320 SIP IP Phone

1 Answer

I have polycom SoindPoint 301 and i would like to use as SIP to one of the VoIP providers. I dont have asterisk in my network and i would like to connect it directly to the VoIP provider. So there is no...


1st. Get the IP address of the phone. and type that into browser.
*- default user: Polycom / password: 456

*- Under menu SIP, type in your voip provider
*-Under menu LINES type in user info and "secret" should be your password.

Make sure your ports are open (SIP is usually 5060) you can change it in that same config screen.

Mar 28, 2011 | Polycom SOUNDPOINT IP 301 SIP

1 Answer

Have a dial tone but cannot ring out or receive calls


It seems that you have set it to silent ring to change this go to menu --> settings --> basic --> ringtype --> and select low trill or low double trill what ever you want

Feb 25, 2010 | Polycom SoundPoint IP 320 SIP IP Phone

2 Answers

Cisco IP Phone 7940 and 3com nbx as 3rd party SIP phones


Here are the instructions for configuring these units for 3cx

http://www.3cx.com/sip-phones/cisco-7940.html

http://www.3cx.com/sip-phones/polycom-soundpoint.html

Since the 3cx softphone worked well, I don't see why you couldn't configure each as for 3cx and make them work as well.

Dec 09, 2009 | 3Com NBX 2102PE IP Phone

1 Answer

Polycom SoundPoint 550-Only Showing 1 line


On the phone, press the menu button, then status, then IP status or whatever and get the phone's IP address. Write the ip address down. On your computer, open up a web browser and input the phone's IP address into the address bar and press enter. This should arrive you at the web gui for that phone. It'll probably ask you for login credentials; by default, the name is "Polycom" (yes , it is case-sensetive) and the password is 456. Once you are logged in, you should see several links like "General" "Network" "Sip" and "Lines". click on Lines. under "line 1", you will see the configuration for that line. simply duplicate the entries for lines 2, 3, and 4.

Jul 29, 2009 | Polycom SoundPoint IP 550 IP Phone

2 Answers

Only one line works


check the ip phone cable and reset the ip phone all setting






Mar 31, 2009 | Polycom SoundPoint IP 320 SIP IP Phone

2 Answers

Polycom ip501f error, application is not present


Make sure you have the latest BootROM and SIP config files for this polycom(sip.ld, sip.cfg, etc...) on your TFTP server. If you do not have this - download from here - http://www.polycom.com/support/voice/soundpoint_ip/soundpoint_ip501.html

If you do not have a TFTP server, you can download one for free.

Dec 04, 2008 | Polycom SoundPoint IP 501 IP Phone

1 Answer

Making a Polycom SoundPoint 501 work on an Avaya IPO


As you have probably found, SIP phones are not supported until R5, which just came out.

Nov 11, 2008 | Polycom SoundPoint IP 501 IP Phone

1 Answer

I am unable to push the configuration files into polycom soundpoint ip 330 through tftpd


This means the phone's SIP application has been erased. You will need to download the SIP app and BootROM from the Polycom support page, host the files on a boot server, and then point the phone to this server from the server menu so the phone will reboot and download the files.

http://www.polycom.com/support/voice/soundpoint_ip/soundpoint_ip330_320.html

Aug 28, 2008 | Polycom SoundPoint 330 IP Phone

Not finding what you are looking for?
Polycom SoundPoint IP 320 SIP IP Phone Logo

13,925 people viewed this question

Ask a Question

Usually answered in minutes!

Top Polycom Computers & Internet Experts

N8nNc

Level 2 Expert

77 Answers

Tom Chichester

Level 3 Expert

51852 Answers

Dayton Computer
Dayton Computer

Level 3 Expert

1554 Answers

Are you a Polycom Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...