I have a 2006 Hitachi Ultravision 42 inch plasma TV. It's was working fine but now I can only get it to power up to stand by mode. It won't turn on when you press the power button on the side of the TV which is when the picuture would come on. BTW, the TV came with the house I just bought and we have not been able to fine the remote yet so if any of the answers require using the remote I don't have one just yet.
Thanks,
Mike
SOURCE: hitachi cle-990
not sure your model number is correct please check here is a manual for the 42 CL plasma TV http://www.hitachiserviceeu.com/scripts/userguide.php/CL42PD2100_EN.pdf if it is a different set please check the model number, this should have a 42 in it (as it is 42")
SOURCE: hitachi manual needed hitachi owners manual or user guide
Hello there
Here is a link to all Hitachi Plasma Tv manuals user guide owners manual and so on
I couldn't Find your model so perehps you should check again, but no worries the link is for ALL manuals so Enjoy It.
http://www.hitachiserviceeu.com/support/guides/userguides.htm
Tom
SOURCE: Need a pedestal stand for an AKAI 42" Plasma
do you have the small feet as shown in the picture? are they in your closet?
ebay?
SOURCE: Vertical Green Bar 3" wide on the right side of my 42" plasma
My thought is that it is an Intergrated Circuit (IC). But it has been brought to my attention that it may be as simple as adding a "ground adapter" to the plug of the TV. If after you try changing out the ground adapter and it doesn't work, try "power cycling" your TV. (unpluging it... Waiting 30 seconds, then plug it back in.) If that fails, contact Hitachi so they can recommend an authorized service center in your area. Hope this helps. Good luck, KMarshall!
SOURCE: 42edt41a hitachi plasma tv went dark sound ok
sounds like your y and z drive boards over heated and need replacing...
180 views
Usually answered in minutes!
×