I have a code of 6 red flashes on my KDS E50-A10 Sony TV. I was told to replace the lamp and I have just done that, but I still have 6 flasing re light code and no picture. any idea what's next?

Hi. Not shore of this model but could be a bulb replacement is needed, Or one of the filter covers may not be making contact.

The red light is indicative of error rather than working ( green ) or standby ( orange ).
I hope you get it sorted.

Have you checked with the Sony flashing codes?

5 flashes - Lamp Driver - (lamp driver faulty)

This is the error code that usually means the ballast (it is the power supply for the lamp) is bad.

SD TECH

If your not sure, google name and make of tv and "red light blinks 6 times". That usually is a code for what is wrong.....My money is on the lamp....especially if it was working fine before. Hope that helps and gd luck to ya

Hi,
If its lamp light on tv front that is blinking red then lamp is dead/ broken and need to be replaced. Lamp replacement procedure is easy and written in user mnaual of tv.
If it is standby/ power light that is blinking then please count how many times it is blinking after three seconds pause and let me know to diagnose tv problem because it is an error code that has info in its blinking.
Thanks.

Hi,
Did you replaced/ took out lamp from tv to inspect it?
3 times red light flashing shows that lamp cover has not been fixed on tv, lamp cover is first thing that needs to remove to take out lamp from tv.
Please check lamp cover and make sure it is fixed properly on tv.
Thanks.

If lamp light on Sony TV front start flashing that means Lamp is dead and need to be replaced.
Lamp replacement is easy and procedure would be written in user manual of TV.

Hi,
It is clear symptoms of weak lamp in TV, replace lamp to correct that problem.
Lamp replacement is easy and written in user manual of TV.
Please buy Sony original lamp for TV safety.
Thanks.

Sounds like the lamp is bad. Might be time to replace the TV.

Please put back lamp (bulb) cover properly and check as lamp cover is open/ not fixed or improper fix is also cause of LED flashing.