CHANGING FEATURES? ON LUCENT PARTNER-18

Changing the time on a Partner system is done on either ext 10 or 11. At one of those ext's press the feature key and "00"
next press the left hand intercom twice
the display should say system programming
enter in "#103"
the display should say system time and the current programmed time
enter the new time in 24 hour format
press feature "00" to logout

http://www.wedophones.com/Manuals/AT&T/Partner%20II%20R4-1%20Programming%20and%20Use.pdf

At ext 10 or 11, press feature 00
then feature and 600 or whatever code you want
then enter the number as you would dial it.
when done, enter feature 00 to get out of programming.

Partner ACS, any release
Changing the time on a Partner system must be done from extension # 10 or 11. 1. At station(Ext.10 or 11) press feature, 0, 0
2. Press the left intercom 2 times
3. Enter # 103
4. Enter the correct time in 24 hr. format, for example:
* to set the time for 09:00 A.M., enter 0900
* to set the time for 04:45 P.M., enter 1645
5. Press feature, 0, 0

If your changing the speed dial numbers under the individual buttons thats done by pressing feature 00, the button you want to change the speed dial number on, and enter in the new number.
If your changing the system wide speed dial numbers, From extension 10 enter in feature 00, press feature then the 3 digit code for the speed dial bank (600-699), then enter in the new telephone number. Either press feature and the next 3 digit code for the next number or press feature 00 if finished.

(For Speed Dials on you phone buttons)
1 Press Feature 00
2 Press the butoon to be programmed
3 Dial the speed dial #
Repeat 2 and 3 for additional #s
hope this helps

--- TeleFurb ---

Changing the time on a Partner system is done on either ext 10 or 11. At one of those ext's press the feature key and "00"
next press the left hand intercom twice
the display should say system programming
enter in "#103"
the display should say system time and the current programmed time
enter the new time in 24 hour format
press feature "00" to logout

Try here!
http://support.avaya.com/japple/css/japple?PAGE=Product&temp.productID=107628&temp.releaseID=194851

Feature 00
LEFT Intercom twice
#209
enter the line number (01, 02, 03, 04, etc)
Press the Keypad for the ring style you want (1-8)

Feature 00 when done.

If this does not work, your release of Partner system is too old....

Press
Feature 00
Left Intercom Twice
Dial #103
Enter Time in Military (14:05 = 2:05 PM)
Feature 00