I want to change from a white door panel to a stainless steel front on dishwasher. kenmore model 3 16374300 . Where do I order the front.?

Door panel part number 00683615, console 00686807.

what is the brand and model number of your dishwasher. Reply with them and i'll look and see if i can can find stainless panels













r

yes / when changing to ss from white . most people wasnt the black control panel . as it looks best . the cost of the panel and stainless . is costley . and inless dw is newer model . most would look at the cost of a new one .. hple this helps mm

the is in fact a stainless panel available
for this model

call appliance parts pro at
1-877-477-7278
ask for part number
AP3126206

If your model number is correct you can find door panel parts at appliancepartspros.com. Type in your model number and look under Section 3, Door and Panel Parts for item 4. There are several different colors available including black and stainless. Make sure you select the correct part number. I hope this helps you.

I have two options for you to consider. One is to take your panel to any sheet metal fabricating shop and have them make a stainless steel version for you. The other is to get a spray can of stainless steel appliance paint and apply it. i have used the stainless steel paint on entire appliances with excellent results.

Black, white and bisque seem to be the only colors available for the double convection oven. Might be possible to find the cooktop, but it's hard to know for sure without the model number.

In my experience, it's often not economical to switch to stainless steel as stainless steel panels can be extremely expensive (I've seen a freezer door on a side by side fridge sell for over $850... Just the freezer door!)

Hi jenniferr922,

I'm Harvey the Master plumber.

Your question is: You purchased a white Kenmore dishwasher and you are redoing your kitchen and all of your appliances are Kenmore stainless steel. You were wondering if the front panel was the only replacement or if you needed to order something else for the control panel.

It's your choise. If you like the control panel, keep it. If not, replace it when you replace the white panel.

Feel free contact me again!
Please give me a rating here at fixya.com before you sign off
Thank you,
Harvey your Master Plumber

There are a couple of ways to do this. The easiest one is to check out www.applianceart.com and they have many different options for "wrapping" the front of your dishwasher. They change it often so if you don't see it, call the company becuase I know they have it.