Question about GE Washing Machines
Suspect water level control they call it a pressure switch
there is a quarter inch line that runs from tub to pressure switch that line can sometimes plug requiring line be removed from pressure switch and cleared
this web page shows a breakdown of commom top load ge washing machine level control is located in top panel
before opening top panel unplug washer from wall
if clearing line does not work level control will probably need to be replaced suggest take picture or draw out
where three wires are hooked before removing part or
change 1 wire at a time to avoid mixing up wiring
Posted on Dec 12, 2009
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Oct 29, 2011 | GE WDSR2080D Top Load Washer
On this model of washer you have 4 separate components that could cause overflowing. The water valve, pressure switch, pressure switch hose & the air dome. If you have to turn the water off to prevent overflowing, I would recommend replacing the water valve. If you can turn the timer off & the water stops overflowing, I would recommend checking the pressure switch, hose & air dome.
Jan 16, 2011 | GE Washing Machines
Mar 18, 2010 | GE Washing Machines
Jan 30, 2010 | GE Washing Machines
Mar 15, 2009 | GE WVSR1060A Top Load Washer
Feb 19, 2009 | GE WBSR3140DW Top Load Washer
Nov 20, 2008 | Washing Machines
Jul 23, 2008 | GE WDSR2080D Top Load Washer
211 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: