Programming Device Control code for Memorex MVT2135B

Direct Code Entry

1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand.

Hello
Three digit universal remote codes for Memorex TV are:
000/ 001/ 004/ 009/ 046/ 049/ 051/ 135
Four digit coeds are:
0004 0009 0049 0051 0135 0031 0000 0268 0310 0001
Direct Code Entry

1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand.

Hello
Setup codes for Emerson TV with "Comcast On demand Custom-3 Universal remote control are:

0154, 0236, 0463, 0180, 0282,
0178, 0179, 0038, 0177, 0280

The Comcast Custom 3-Device universal

remote control is preprogrammed at

the factory to operate the Cable Box

supplied by your Comcast system, an

RCA TV, and an RCA VCR (in the AUX

mode). To control devices other than

default brands (excluding the Cable

Box), perform the below steps; otherwise
skip this section:

1* Turn on a device (e.g., VCR or DVD

Player) and, if applicable, insert

media, (e.g., video cassette or disc).

NOTE: Please read steps 2 to 6 completely

before proceeding. Highlight or write

down the codes and device you wish to
program before moving on to step 2.

2* On the remote control, press a

device key once (i.e., AUX or TV).

NOTE: Use the AUX key to program

control of an Audio Amplifier or

Receiver, a DVD Player, a Home-

Theater-In-A-Box Device, a PVR (or
DVR), or a VCR.

3* Press and hold Setup until the

selected mode key blinks twice,
then release Setup.

4* Locate the code for your device in

Manufacturer's Codes on the back

of this user guide. Brands are listed

in alphabetical order with the
most popular codes listed first.

5* Enter the first four-digit code for

your device. If you perform this

procedure correctly, the selected

mode key will blink twice.

NOTE: If you enter an invalid code, the

selected mode key will display one long

blink and exit the programming mode.
Repeat steps 2 to 5 with a valid code.

6* Aim the remote control at your

device and press Power once. The

device should turn off. If it does

not respond, repeat steps 2 to 6,

trying each code listed for your
brand until you find one that

Searching For Your Code.

NOTE: If the device does not have a
Power key, press the (Play) key
OK

Hello
Three digit universal remote codes for Sharp TV are:
004/ 009/ 079/ 095/ 111/ 112/ 114/ 122/ 123/ 124/ 173
Four digit universal remote code for Sharp are:
0079 0123 0063 0020 0004 0009 0226 0266 0006 0095 0122
Direct Code Entry

1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand

Four digit universal remote codes for Sharp TV with RCA RCR311W are:
1004, 1007, 1009, 1015, 1023, 1078, 1083, 1094, 1107, 1123, 1125, 1158, 1182, 1195
OK.

Hello
Three digit universal remote codes for Memorex are: 000/ 001/ 004/ 009/ 046/ 049/ 051/ 135
Four digit universal remote code for Memorex are: 0004 0009 0049 0051 0135 0031 0000 0268 0310 0001
Direct Code Entry

1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand

Hello
Remote code for Sanyo TV with Comcast Custom DVR-3 device universal remote control is
0154

1. Turn on a device (e.g., VCR or DVD

Player) and, if applicable, insert

media, (e.g., video cassette or disc).

NOTE: Please read steps 2 to 6 completely

before proceeding. Highlight or write

down the codes and device you wish to

program before moving on to step 2.

2. On the remote control, press a

device key once (i.e., AUX or TV).

NOTE: Use the AUX key to program

control of an Audio Amplifier or

Receiver, a DVD Player, a Home-

Theater-In-A-Box Device, a PVR (or

DVR), or a VCR.

3. Press and hold Setup until the

selected mode key blinks twice,

then release Setup.

4. Locate the code for your device in

Manufacturer's Codes on the back

of this user guide. Brands are listed

in alphabetical order with the

most popular codes listed first.

5. Enter the first four-digit code for

your device. If you perform this

procedure correctly, the selected

mode key will blink twice.

NOTE: If you enter an invalid code, the

selected mode key will display one long

blink and exit the programming mode.

Repeat steps 2 to 5 with a valid code.

6. Aim the remote control at your

device and press Power once. The

device should turn off. If it does

not respond, repeat steps 2 to 6,

trying each code listed for your
brand until you find one that

works. If it still does not work, try

Searching For Your Code.

NOTE: If the device does not have a
Power key, press the (Play) key

Hi, the codes you have requested;

Magnavox - 0054, 0706, 0030, 1454, 1254

Instructions to program code:

1. Turn on a desired device (e.g.,VCR or DVD player) and, if applicable, insert media (e.g., cassette or disc). NOTE: Please read steps 2 through 4 completely before proceeding. Highlight or write down the codes and device you wish to program before starting step 2.

2. On the remote control,press a device key once (i.e., VCR/PVR, DVD, CBL/SAT,or TV).
NOTE: To program control of a VCR, PVR (or DVR),TV/VCR Combo, or TV/VCR/DVD Player Combo press VCR/PVR once.After programming a VCR Combo device, you will be able to control channel selection, volume, and VCR functions. NOTE: To program control of a DVD Player,DVD Player/VCR Combo, or TV/DVD Player Combo, press DVD once.After programming a DVD Combo device, you will be able to control channel selection, volume, and DVD functions. NOTE: To program control of a Cable Box, Cable Box/PVR (or DVR) Combo, Satellite Receiver, or a Satellite Receiver/PVR (or DVR) Combo, press CBL/SAT once.

3. Press and hold SET until the LED (red light) blinks twice,then release SET.

4. Use the Manufacturer's Codes (starting on page 18) to locate the type of device and brand name and then enter the first four-digit code for your device. If performed correctly,
the LED will blink twice. NOTE: If the LED did not blink twice, repeat steps 2 through 4 and enter
the same code again.

5. Aim the remote control at the device and press POWER once.The device should turn off. If it does not, repeat steps 2 through 5, trying each code for your brand until you find one that works.

Hello

Three digit universal remote code for Memorex are:-
002 115 206 502 506 601 701 706 000/ 001/ 004/ 009/ 046/ 049/ 051/ 135

Four digit universal remote code for Memorex are:-
0004 0009 0049 0051 0135 0031 0000 0268 0310 0001

Direct Code Entry

1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand.

NB: Switch OFF and switch ON the Tv each time with its front panel power ON/OFF switch, before trying an other code.
OK.

one for all UCR-3220 I need code for a RCA TV

Hi,

PLease follow the steps below

1.Turn on a desired device (e.g.,VCR or DVD player) and, if
applicable, insert media (e.g., cassette or disc).

2. On the remote control, press a device key once (i.e., DVD/VCR,
CBL/SAT,or TV).

NOTE: To program control of a VCR, PVR (or DVR),TV/VCR Combo,
or TV/VCR/DVD Player Combo press DVD/VCR once.After programming
a VCR Combo device, you will be able to control channel selection,
volume, and VCR functions.
NOTE: To program control of a DVD Player,DVD Player/VCR
Combo, or TV/DVD Player Combo, press DVD/VCR once.After programming
a DVD Combo device, you will be able to control channel
selection, volume, and DVD functions.
NOTE: To program control of a Cable Box, Cable Box/PVR (or DVR)
Combo, Satellite Receiver, or a Satellite Receiver/PVR (or DVR)
Combo, press CBL/SAT once.

3. Press and hold SET until the LED (red light) blinks twice,
then release SET.

4. Use the Manufacturer’s Codes to locate the type of device and brand name and then enter
the first four-digit code for your device. If performed correctly,
the LED will blink twice.

5. Aim the remote control at the device and press POWER
once.The device should turn off. If it does not, repeat
steps 2 through 5, trying each code for your brand until
you find one that works.

6.You are set

thanx