Philips 50PL9126D/37B 50" DLP TV Logo
Posted on Dec 11, 2009

I have a Phillips 50pl9126d/37 it wont turn on picture or sound blue light in the front flashes 6 times fast looked at the bulb and it doesnt seem broken ie( no glass bits inside broken off) otherwise everything else looks fine as far as I can tell.

2 Answers

Anonymous

Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Mayor:

An expert whose answer got voted for 2 times.

  • Contributor 1 Answer
  • Posted on May 17, 2010
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Mayor:

An expert whose answer got voted for 2 times.

Joined: May 17, 2010
Answers
1
Questions
0
Helped
2212
Points
4

I currently have this problem also. However my TV is blinking 6 times fast and then 5 times slowly. I was told by a TV repairman that it was in fact the bulb or lamp. I plan to replace it, soon, I will keep you posted hopfully it works.

  • familyrhode Sep 28, 2010

    So, did a new bulb solve your problem?

×

Anonymous

Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

  • Contributor 1 Answer
  • Posted on Jan 16, 2010
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Joined: Jan 16, 2010
Answers
1
Questions
0
Helped
2212
Points
1

Have u found a answer to the problem my tv is doing exact same thing

  • 1 more comment 
  • skiles1964 May 06, 2011

    i changed my bulb. will play for a while and go out but still have sound. brand new bulb.

  • Anonymous Apr 19, 2013

    I am having exact same issue...the contrast gets funky and then the screen seems to flicker is best way to describe it.

  • Anonymous Apr 19, 2013

    I have same issue. It will run for good hour or so then the contrast gets funny (peoples hair and heads look funny colorwise) then the screen has a slight flickering to it. I will shut it off and I cannot turn back on until bulb has totally cooled. Yes, Brand New Stinking Bulb.

×

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

My 50 inch Phillips tv model #50PL9220D/37 wont turn on? blue power light is just flashing ? what could be the problem?

Hello more than likely the lamp has gone bad. On that set you have to remove the back cover to check the lamp to see if it has broken. the picture gives you an idea and some instructions on how to change it. tks7bef3142-61c4-4329-b27d-2507769a830c.jpg
0helpful
1answer

My Phillips 50PL9126d/37 is making a loud humming noise and the picture color is barely there.

Hi, Sounds like a bad color wheel. If you know what your doing you can get one on E-bay for around $170. In the past the whole light engine would need to be replaced $700 ish.
Good Luck
0helpful
1answer

Phillips tv no pic no sound just flashing light

Its not going to be a do it yourself repair--likely a bad board or even boards--have a repair center (authorized for this brand) inspect it.

Just getting a set like this apart safely is tricky.
0helpful
1answer

Have a phillips 50pl9126d/37 put new bulb still no piture or sound

bearsdis,

I have a tip at http://www.fixya.com/support/r5207658-dlp_tv_run_after_replacing_lamp which explains the troubleshooting procedure and where to get any parts that you may need.

Thanks for using FixYa and for the great rating.

hardrocko
0helpful
1answer

My Philips tv 60PL9200-37 has sound,but NO picture. The front blue light flashes 6 times slow,pause,5 times fast. Once in a blue moon picture and sound are ok. What could be wrong?

Hello,

When your television actually flashes the front blue light, it is passing a message that there is a problem inside the unit. There are 2 things you should check but my best bet is that it is the t-con board of the television that is bad. The other component you can check is the lamp, but if the lamp is faulty you will not be getting sound therefore the problem is from the t-con board.

It is located by the middle of the main panel of the television, once you get it replaced, the television will be in good shape.

Take care and good luck
0helpful
1answer

Philips Model 50PL9126D\37 Turn TV on and after a

Ur LCD inverter board is dead,must change to get ur picture back.It usally a long board.
0helpful
1answer

Philips 50pf9631d/37 no picture sound. Red light flashing

hey crs246, I have the same exact problem with my philips tv same model. Have you gotten any help that you can share with me. Any help would be appreciated.
3helpful
1answer
0helpful
1answer

50 inch phillips hdtv model:50pl9126d/37, no picture...

Unplug for one hour then plug back in---worked for me--computer resets
0helpful
1answer

Problem

power board is bad if it doesnt power up -- the red flashing lights mean that you need to upgrade the software-- you can get a new software upgrade on the website for philips --- use a thumb drive to install it into the television
Not finding what you are looking for?

2,222 views

Ask a Question

Usually answered in minutes!

Top Philips Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1259 Answers

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you a Philips Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...