Paper Jammed. Have appeared to remove all paper. But I keep getting "Carriage Jam, open door, clear carriage jam then pres OK" message. Message on my computer screen says "The print cartridge carriage is stalled" Any light shed on this greatly appreciated. Thanks

Paper jams can be true or false. A false paper jam occurs when the error message displays, but no jammed paper is in the product. The following solutions apply to both true and false paper jam errors.

Print a self-test report Use the following steps to print a self-test report.

1. Load plain white paper in the input tray.
2. Press Setup , and then press 2 . The Print Report menu displays.
3. Press 1 to select and print a Self-Test Report
   

Solution one: Clear the paper jam Step one: Remove loose paper from the tray Remove any loose sheets of paper from the input tray and the output tray.

Step two: Clear the jam from the back of the All-in-One

1. Figure 2: Remove the rear access door
2. Gently pull any jammed paper out of the rollers inside the product.
3. Carefully remove any scraps of paper that are still stuck in the product.
4. Reattach the rear access door. Insert the two posts on the right side of the door into the holes on the product, and then push the door in until it snaps into place.
5. Reconnect the power cord to the back of the product, and then press the Power button ( ) to turn on the product.

Step three: Clear the jam from the front of the All-in-One Follow these steps to remove the paper jam from the front of the product.

1. Without opening the cartridge access door, check the tray for jammed paper that you cannot remove from the back.
2. If you see jammed paper, gently pull it out.
   

Step four: Print a self-test report

• If the issue persists , continue with the next solution.

Solution two: Make sure that the carriage can move freely Follow these steps to make sure that the carriage can move freely. Step one: Check the paper path

1. Check for any paper or object that might be stopping the carriage. Figure 4: Example of paper stuck in cartridge access area
2. Remove any paper or objects you find.
3. Reach inside the product, and then manually move the carriage.
   • If the carriage is stuck on the right side , move the carriage to the left side of the product.
   • If the carriage is stuck on the left side , move the carriage to the right side of the product.
   • If the carriage is stuck in the middle , move the carriage to the right.
4. Remove any paper or obstructions found.
5. Make sure that the carriage can move freely across the width of the product by gently pushing the carriage to the left, and then to the righ

Step two: Print a self-test report

• If the issue persists , continue with the next solution.
• If the self-test report does not print , continue with the next solution.

Solution three: Clean the rollers and the rear access door Dust, paper fiber, and other debris might accumulate on the paper feed rollers and cause paper jams and paper feed issues. Follow these steps to clean the paper feed rollers inside the product. Step one: Clean the rollers

1. Press the Power button ( ) to turn off the product.
2. Disconnect the power cord from the back of the product.
3. Press in the tab on the left side of the rear access door, and then pull the door away from the product to remove it. Figure 6: Remove the rear access door
4. Lightly dampen a clean, lint-free cloth with bottled or distilled water, and then squeeze any excess liquid from the cloth.
5. Press the cloth against the rollers and rotate them upwards with your fingers. Apply a moderate amount of pressure to remove any dust or dirt buildup. Figure 7: Rotate the paper feed rollers
6. Make sure that the paper feed rollers on the rear access door are clean, free of paper bits, and rotate freely.
7. Clean the surface and the rollers of the rear access door the same way you cleaned the large rollers inside the product.
8. Replace the rear access door. Insert the two posts on the right of the door into the holes on the product, and then push the door in until it snaps into place.

Solution four: Service the product

This error message is displayed by the printer when paper is jammed in one or more locations. In such a case, users are recommended to remove the jammed paper from the specified location. The entire paper path must be checked for any pieces of paper. To stop the message, open and close the top most cover of the printer. Lastly, verify the flags and the sensors. If the problem persists, the cause of the error message could be a broken sensor or sensor lever.

It seems you mistook Carriage Jam as Paper Jam, but they are different issues. Carriage jam means the carriage that carries the cartridges is jammed which needs to be moved or be cleared manually after opening the door.

Please follow the instructions mentioned here (Click Here) [source HP Support].

Good Luck.

Let me know if you need further help.

Thanks for using FixYa.

This means that your Epson printer has come to its end of life. In short, Epson wants you to retire your printer and buy a new one. Your Epson printer may be in good shape which is often the case. But Epson has this build-in "feature" which they want you to buy a new one.

If paper is jammed, a Paper jam message will appear on the control panel display.

Follow these steps to clear the jam:

1. Gently pull any jammed paper out of the output tray or sheet feeder.
   
   
2. If the paper is stuck inside, turn off the Epson Stylus CX.
   
   
3. Open the scanner, remove the jammed paper and torn pieces, close the scanner, and turn the Epson Stylus CX back on.
   
   Note: Be sure to check the far left of the carriage area when checking for jammed paper. Paper that is jammed there may be hidden from view.

If paper jams inside the Automatic Document Feeder, clear the jam as follows:

1. Open the Automatic Document Feeder cover and remove any jammed paper.
   
   
   
   
2. If necessary, lift the document cover and remove any paper that has jammed inside.
   
   
   
   
3. Press OK to clear any messages on the display screen.

If paper is jammed, a Paper jam message will appear on the control panel display.

Follow these steps to clear the jam:

1. Gently pull any jammed paper out of the output tray or sheet feeder.
   
   
2. If the paper is stuck inside, turn off the Epson Stylus CX.
   
   
3. Open the scanner, remove the jammed paper and torn pieces, close the scanner, and turn the Epson Stylus CX back on.
   
   Note: Be sure to check the far left of the carriage area when checking for jammed paper. Paper that is jammed there may be hidden from view.

If paper jams inside the Automatic Document Feeder, clear the jam as follows:

1. Open the Automatic Document Feeder cover and remove any jammed paper.
   
   
   
   
2. If necessary, lift the document cover and remove any paper that has jammed inside.
   
   
   
   
3. Press OK to clear any messages on the display screen.

Go to kodak.com/go/itg and follow the step by step troubleshooting. If you still get the same error,Time to contact Kodak at 1800 421 6699 and Your printer will be replaced free of cost.

after closing the cover and removing the jammed papaer does it still says "paper or carriage jam"????

if it still prompts you that theres a jam and you've already removed it, try to turn off the printer, disconnect from its connections (pc and ivr or ups or wherever its connected) wait for like 5-10 sec then connect it again...

hope this resolves ur prob...

ive experience it to with my hp j3500 all in one... a paper jam, this is what i did and i think it worked for me... hope it do to your printer.. ciao!

most likely the sensor on the paper path out of position, chech it out and put it back to where it have to be, good luck!

I was able to run run a piece of photo paper through a couple of times and printer now seems to be working again. The theory was that running a heavy piece of paper through might help clear little piece of paper that was not visible. The photo paper is less likely to tear if it gets jammed too.