Trouble getting started

Try here:

http://drivers.softpedia.com/get/SOUND-CARD/OTHER-SOUNDCARDS/Lexicon-Omega-Driver-25.shtml

The software is by Stienberg and is called "Cubase" that is delivered with the Lexicon. The Omega doesn't really have any software to speak of except for the drivers. Browse the software disk looking for the section containing the drivers. When you install it, it will create a Lexicon folder with the root of your C drive and in it will be an Omega folder. In that is a driver folder and a folder of help files. In the Driver folder folder you will find the installer file "Omega Setup". Launch that program to install the drivers. Please note I have one of these and it can be frustrating to get things working. Make sure in the PC in the control panel "sounds and devices" that under the tabs that the Omega is the device to send and receive and for voice. Once you have done the install, the Omega should be in the list of available devices to select as default.

at first resistering your product. then you download your vista driver on lexicon website; thanks

What sort of help do you need?

http://www.lexiconpro.com/product.php?id=6#downloads

There are some helpful files here for the omega lexicon pro.

Hope this helps!!

Send this info to lexicon omega website.They do answer questions for you..They should know what that error means.

The omega is like an external sound card. It has to be connected via your computer with a device driver,the software that came with the lexicon. Then you record on a software program such as Cubase.
Go to the guitar center for more help or go to google .com and type in lexicon omega. Lots of sights to look for answers or better yet go to lexicon omega's home site.

one of several install steps (the steps seem to vary depending on which manual you can find) mention checking your sound device setup in control panel. ON one machine I installed the sound devices were not affeted. On a 2nd PC they were changed from drivers installed with PC to the Lambda driver

Win XP settings->control panel->Sounds and Audio Devices then select Audio tab. Make sure the three areas are set up to use your PC's default drivers and not lambda's.

You may need to verify this again when reconnecting the Lambda USB cable. Sort of new but ran into this "issue" as well.

Found info in Lambda Studio Software Installation Guide I downloaded, step B following driver install.

Yes having the same problem with new driver that Lexicon put on their site 2.5 driver has screwed up everything and the soundcard is nolonger working because of this new driver even their website is down very poor avoid Lexicon Omega

I've had this problem and similar ones. Following these steps seems to help:

Starting Cubase before switching on the Omega.

Go to 'Devices' and then 'Device Set-up'. Make sure you're in the 'VST Audio System' part of the menu. Make sure the Omega is selected as the ASIO driver - if not, switch it. Then click on 'Set to Defaults', then 'Apply' and 'OK'.

Or re-setting the Omega sometimes helps too.

It's a pain, though.

Yes it's extremly tempramental, just keep repeating the proces it' will work eventually!