How to reset drum message after replacement on brother printers

On these machines the blurry prints is usually due to bad fuser sleeves, or worn out fuser roller and sleeve on the fuser. You may replace the fuser unit or just order sleeve and roller for your model and replace them on the fuser. Will take about 2 hours of your time. To check if the blurry prints are due to fuser issues, just swipe your hand over the printed page and if you have toner dust on your hand, the fuser is not cooking the toner on the paper. Fuser roller and sleeve are bad and need replacing.

You need a new drum unit. The built-in cleaning blade has worn out.

I'm more familiar with HP printers, but it sounds like a fuser is bad. The fuser effects print quality as well. If you've replaced the toner, as you have.

yes indeed. i'm sure by your symptoms, thats what it would be.

Are you using genuine Brother supplies? Generic supplies are the main reason for print quality issues. Have you ever changed thr drum unit ? Expensive! You can buy a new machine and get a new drum and toner for a little bit more.

I’m happy to help further over the phone at https://www.6ya.com/expert/jayw_0e86fb055a7b73de